Xerox workcentre 6505 My printer dosn't print it shows ' load manual feed slot' How do you fix this problem When copying it works perfectly

Try this link:

http://www.support.xerox.com/SRVS/CGI-BIN/WEBCGI.EXE?St=338,E=0000000005964940329,K=5718,Sxi=4,Case=obj(10172)

Inkjet photo prints on plain paper usually look sort of faded, Try some photo paper.

the paper lift up motors or springs in the trays are failing

try disconnecting the printer from your computer then uninstall the printer and reinstal it again the reconnect the cord from the printer to the computer and try that

copier/scanner should do the trick and the new product will contain all the equipment.

Pick up the phone and call the company that sent you that printer and have them send you another printer or someone who can fix the printer.

That's what you warranty is for.

Better still, return the defective printer to Xerox and then purchase a Lexmark printer. :)

Don

If your on maintenance tell them you want a replacement. If you have a maintenance agreement you are entitled to an identical replacement. Write a letter, with the serial number, peoblem and tellt them you want to exercise your TSG agreement. Total Satisfaction Agreement.
Not fixing it is rediculas.

The XD100 has a manual feed on the right side of the device. You can slide the guides to fit the envelope. Use the envelope printing in your program and I believe you need to specify the size of the envelope in the driver. I think you want to feed the envelope face down (side to be printed down) to have it print on the correct side, but I could be wrong. One way to check of course, try it one way and if it prints on the wrong side, flip it over. There may be an image on the feed slot that shows which side to use.