Question about Kenmore Washing Machines
I believe this is an insufficient water supply code. Check the strainers in your supply hoses. Should reset after the supply is restored.
Posted on Dec 06, 2016
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The following link explains the "F20" error code:
I recommend checking your washer installation for a possible siphoning condition and kinked fill hoses, first, as these are the easiest items to rule out.
If you have questions, please let me know. I hope this helps you.
Posted on Jan 06, 2009
F20 ERROR CODE ON A KENMORE HE2T FRONT LOAD WASHER.THE FIX FOR ME WAS TO REPLACE THE TUBE THAT RUNS FROM THE PRESSURE SWITCH TO THE BOTTOM OF THE WASHER.YOU MUST REMOVE THE TOP AND BACK COVERS OF THE MACHINE(EASY).REPLACED TUBE WITH3/16 INCH CLEAR TUBE.THE ORINGINAL TUBE HAD A PIN HOLE FROM RUBBING AGINST THE SIDE OF THE MACHINE AFTER 5 YEARS OF USE.THIS COST UNDER $10 DOLLARS TO FIX. NO SERVICE GUY=MORE BEER MONEY GOOD LUCK.
Posted on Sep 19, 2012
Tips for a great answer:
May 19, 2018 | Kenmore Washing Machines
Dec 11, 2014 | Kenmore Elite HE5t Washer
Jan 13, 2014 | Kenmore HE2 Plus Front Load Washer
May 14, 2010 | Kenmore Elite 45986 Front Load Washer
Jan 19, 2010 | Kenmore HE3T Washer
May 27, 2009 | Kenmore HE2 Plus Front Load Washer
Jan 17, 2009 | Kenmore 3.8 cu. ft. HE3t Front Load Washer
Jan 05, 2009 | Kenmore Elite 45986 Front Load Washer
Nov 07, 2007 | Kenmore Elite 45986 Front Load Washer
31 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: