Question about Washing Machines

1 Answer

The heating element has gone in my Haier HNS TVE washing machine. Is the element accessible from the front or the rear of the machine?

I can't find a repair manual to help with my repair. Don't want to strip the back off if the element is accessed from the front of the machine and vice vice . Hope you can help.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Washing Mach... Master
  • 40,527 Answers

Go to and enter the model. With luck, you will be presented with a list of common repair parts and may be able to view a generic Haier video showing disassembly and identifying parts.

Posted on Dec 05, 2016

Testimonial: "Thanks very much for your reply. I have been unable to trace my problem on this site. I will try another. Looks like they don't intend people to fix this model: Haier HNS1260TVE washing machine."


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Change heating element Samsung Dv5451aew Front Load Dryer

On most front load machines the first piece that must be removed to access anything is the top. There are a couple of screws/bolts at the top rear that secure it. It then opens, sometimes by sliding it slightly rearward fist to release the catches. Then you can start removing other panels.

Sep 16, 2014 | Samsung Dv5451aew Front Load Dryer

1 Answer

Zanussi jetsystem turbodry 1600 wjs1665 w is not heating the water

More than likely the heater element has failed.
This is located at the rear of the washer drum.
It means removing the rear half of the cabinet to access it.

Mar 29, 2010 | Zanussi ZWF1430W Front Load Washer

1 Answer

Machine not spinning out comes up error7 it is a haier hns 1460 tve model , pump is filling up and emptying drum ok , took back cover off belt and spider both fine drum turns if you turn belt what could be...

Check lid switch.

If you have wash action from then the motor is most likely O.K.

If your lid switch is faulty, the machine stops before the spin cycle.


Oct 21, 2009 | Haier Washing Machines

1 Answer

Cold drying cycle in my haier

this is usally that the spade wire connector has fallen off the heating element remove the top of the machine and, check

May 28, 2009 | Haier 14.3 lb. Washer/Dryer Combo

1 Answer

Haier Washer M # XQG50-11

Once you remove the rear access panel, you would see the main pulley on the rear of the outer tub. You need to remove that nut with a metric allen wrench. once the pulley is off, you can then remove the bolts holding the yoke in place. The Yoke and the bearings are available as a part assembly from haier. It is highly unlikely that you would need to replace the outer tub.

Mar 07, 2008 | Haier XQG50-11 Front Load Washer / Dryer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

78010 Answers

Brad Brown

Level 3 Expert

16852 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides