Question about Horizon Exercise & Fitness

2 Answers

I have a Horizon CT7.1 the treadmill won't go all the way to the floor it stops about an inch from the floor. I put it up to clean the floor and now it's stuck what do I do

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Habit-Forming:

    Visited the website for 3 consecutive days.

  • Expert
  • 144 Answers

Hi There, can you possibly do an auto-calibration to correct things? You can contact jatinahATrocketmailDOTcom for more help if needed. Good Luck!~

Posted on Jan 03, 2017

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Horizon Master
  • 6,694 Answers

If you wish to get some details about treadmill ; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Posted on Dec 05, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ticking sound on horizon t101 treadmill


If you wish to get some details about treadmill repair; visit the site linked here. in the search tab put the world "ticking" and search.
http://electro-medical.blogspot.com/

Jan 06, 2017 | Horizon Exercise & Fitness

1 Answer

What do I do to get treadmill to cut off automatically?


If you mean stop after a set period of time has elapsed, there is no setting for this. You could get a timer to plug the treadmill into and do it that way.

Aug 25, 2014 | Horizon Fitness Horizon T101 9 Program...

1 Answer

Horizon t207


follow this steps and fix it. God bless you

1.
    • 1
Unplug the treadmill. Locate the console key and place the safety or reset key into the treadmill console. Replace any parts that need replacing, or is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill.
    • 3
Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
    • 4
Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset.move on to the next step.
    • 2
Locate the reset switch on the underside of the treadmill console. Usually the button

Oct 08, 2013 | Horizon Exercise & Fitness

1 Answer

Horizon t202 treadmill makes a constant beeping with the word "connection" displayed on dash board.


1) adjust the REED switch see the diagram attached. Clean it+ 2)test for open or faulty 3) tight the connector very well.
2) tight the upper and lower connectors very well and clean it.
3) inside from console tight the ribbon cable and clean it

God bless you503120b9-6538-4683-b3c1-71627f030c08.gif

Sep 02, 2013 | Horizon T202 Treadmill

1 Answer

My horizon t901 treadmill console display has stopped working any ideas ?


please adjust the REED switch, see the diagram attached, clean it+tight the connector very well, and test for open or faulty with DVOM
2) tight the ribbon cable for keypads
3) replace the batteries by new ones. and clean the contacs batteries very well.see the block diagram
God bless you2_18_2013_11_07_35_pm.gif2_18_2013_11_08_04_pm.gif

Feb 18, 2013 | Horizon Exercise & Fitness

1 Answer

Horizon treadmill won't incline


Step 1:

see the diagram attached.

Clean the motor, lube the gear+shaft
Adjust the small POT for a little.
RUN the software calibration for troubleshooting. see the diagram
2_8_2013_11_10_42_am.gif

Step 2:

2_8_2013_11_11_14_am.jpg

Step 3:

2_8_2013_11_11_47_am.jpg

Step 4:


he Steps for Newer Style Console Calibration
1.Locate the calibration area on the rear or underside of the console (a hole, near the console's center, that goes through to the electronics board. (This hole should not have a screw in it.)
2.Insert a pencil (eraser end), into the hole and feel around for the cal button (will click when pressed).
3.Press the button 2 times (with the pencil eraser). The first click should show CL11 in the console, the second click should show CL21.
4.If the process was done correctly, and CL21 appears in the console, you are in "calibration mode." The next few steps consists of pressing buttons on the console and observing settings. This will not require any other tools.
5.Press ENTER. CL22 should display in the TIME window and (??) in the SPEED window.
6.Press ENTER. CL23 should display in the TIME window and (??) in the SPEED window.
7.Press ENTER. CL24 should display in the TIME window and (??) in the SPEED window.
8.Press ENTER. CL25 should display in the TIME window and (??) in the SPEED window.
9.Press ENTER. CL26 should display in the TIME window. You should then see the letter "E."
10.Press ENTER. You should see "SS" or "55" in the console.
11.Push the STOP/START button. For safety, at this point, you should step off, or be off, the treadmill.
12.Push the ENTER button. The walking belt should start to move, accelerate to maximum speed, then stop on its own.
13.When the belt stops, the incline should self test by raising to its highest incline position, then lowering back down to its lowest position.
14.Once the incline test is complete, push the POWER button 2 times. The unit should shut off and the console should go completely blank. If this happens, the treadmill is done calibrating and is ready for use.
15.If the letter "F" appears in the SPEED or INCLINE window when the power button is pressed 2 times, the treadmill is indicating a failure somewhere either in the SPEED or INCLINE (depending on the window the "F" appeared in). Troubleshooting the failure would be the next step.
God bless you

Feb 07, 2013 | Horizon Fitness Horizon T101 9 Program...

1 Answer

How do you change the speedometer on a Horizon T103 treadmill from Miles to KMs


you must go under the display board, or monitor, see the small orifice, and put the point of erase pencil in the small orifice and touch the small switch, and ready.
God bless you

Nov 25, 2012 | Horizon Fitness Horizon T103 14 Program...

1 Answer

My Horizon fitnessT101 is brand new and i put it all together.Than i used the magnetic key and started it and the treadmill didn't start it just displayed E1 on the monitor.


Had same problem. I called horizon and after troubleshooting, they could not solve and replaced the entire circuit board. I was under warranty , so i was fortunate to not have to pay for one.

Sep 09, 2011 | Horizon Fitness Horizon T101 9 Program...

1 Answer

I have a Horizon fitness CST3 and the belt stops running but everything else stays on. Do you know what is cuasing my problem?


How old is your treadmill? Has the deck been lubricated? Do you smell anything odd when the belt stops? Unplug treadmill, remove motor cover and check cables are all connected.

Oct 23, 2010 | Horizon Fitness Merit Fitness 725T...

Not finding what you are looking for?
Exercise & Fitness Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Horizon Exercise & Fitness Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

128 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

Are you a Horizon Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...