Question about RCA Televison & Video
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
It needs an internet connection.either wifi or Ethernet.then you will be able to choose from the menu within the set.If it's android you can look for googleplay.if it's toshiba or independent make it may run on a Linux o.s.which means you need to use it's built in browser to download or use URL of Internet addresses.
most nowadays are android based o.s. So it's googleplay for apps for which you need a gmail account which is free and easy to create.
Posted on Apr 05, 2015
Tips for a great answer:
Jun 06, 2018 | Vizio Televison & Video
Oct 17, 2017 | RCA Televison & Video
Sep 23, 2017 | Televison & Video
Oct 15, 2015 | Samsung 40" 1080p 120Hz Slim LED Smart TV...
Hold down MENU
on the remote and VOLUME DOWN on the TV it's self at the same time for at least
4 seconds. The set won't say so, but the lock will be unlocked
Hold down the 0
on the remote and the VOLUME DOWN buttons on the TV its self at the same time
for at least 4 seconds. The set won't say so, but the lock will be unlocked
Hold down the
MENU button on the front of the TV and the TV button on the remote at the same
time for at least 4 seconds.
Hold down GO
BACK on the remote and MENU on the front of the TV at the same time for at
least 4 seconds.
Hold down EJECT
on the front of the TV and the MENU button on the remote at the same time for
at least 4 seconds.
Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.
Aug 09, 2012 | RCA TruFlat 27F520T 27" TV
Automatic: The UPS performs a self-test automatically when turned on, and every
two weeks thereafter (by default). During the self-test, the UPS briefly operates the
connected equipment on battery.
Manual: Press and hold the button for a few seconds to initiate the self-test
REPLACE BATTERY LED ILLUMINATES
Replace Battery LED flashes and
short beep is emitted every two
seconds to indicate the battery is
Check that the battery connectors are fully engaged.
Weak battery. Allow the battery to recharge for 24 hours. Then, perform a self-test. If the
problem persists after recharging, replace the battery.
Failure of a battery self-test. The UPS emits short beeps for one minute and the Replace Battery LED
illuminates. The UPS repeats the alarm every five hours. Perform the self-test
procedure after the battery has charged for 24 hours to confirm the Replace
Battery condition. The alarm stops and the LED clears if the battery passes the
Sep 09, 2011 | APC Smart-UPS RT 5000VA (SURTD5000XLI) UPS...
Feb 10, 2011 | RCA TruFlat 27F520T 27" TV
Oct 12, 2010 | HP Compaq nx6110 PC Laptop
Jun 14, 2018 | RCA Televison & Video
73 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: