Question about Paxar Monarch 9403 Thermal Printer

2 Answers

How do I load tape in a Monarch PAXAR 1131? The machine was turned over to me, but the instruction manual is missing?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that has over 500 points.

  • Master
  • 226 Answers

* Step 1 Pull the latches back and open the cover until you hear a click.

  • Step 2 Tear off the first ten inches of the labels and liner.
  • Step 3 Place the label roll between the holders.
  • Step 4 Drape the supply across the labeler and position it in the center over the peel bar.
  • Step 5 Close the cover.
  • Step 6 Hold the trigger down while holding the labeler upside down.
  • Step 7 Feed label strip over the roller and into the large slot under the arrows.
  • Step 8 Hold the strip in place and squeeze the trigger eight times, until the labels feed through the rear exit.
  • Step 9 Remove and discard any loose labels.
  • Posted on Jul 20, 2009

    Ad
    • Level 2:

      An expert who has achieved level 2 by getting 100 points

      MVP:

      An expert that got 5 achievements.

      Novelist:

      An expert who has written 50 answers of more than 400 characters.

      Governor:

      An expert whose answer got voted for 20 times.

    • Expert
    • 113 Answers

    Http://www.theretailerscatalog.com/howto.asp has a link to a video clip on how to do this.
    I know that sometimes that written steps and documentation, though helpful to some, is not as helpful where video can step in. Towards the top of the page, there is a video link, click that. Then click on the 1130 link and you should have what you need.

    Posted on Sep 28, 2009

    Ad

    1 Suggested Answer

    6ya6ya
    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    Hi,
    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
    click here to download the app (for users in the US for now) and get all the help you need.
    Goodluck!

    Posted on Jan 02, 2017

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Error #756


    I haven't worked on Paxar products, but the manual directions seem reasonably complete, with drawings. (PDF pages 17-22 provide the basic directions; the following pages give directions for special media types and options.)


    Error #756 = "Load Supplies"

    I deduce from this that somehow you missed the paper detector when you loaded the supply strip. This is probably the "die cut sensor" referenced on page 2.3 (PDF page 19, shown in drawing on the next page). Make sure the strip feeds through the detector slot.

    Nov 28, 2011 | Paxar Monarch 9825 Thermal Label Printer

    1 Answer

    Monarch paxar 1110 pricing gun brand new. The box was thrown away and it isn't working. The label prints out without a price the ink is fine we tried it on a different gun. Any trouble shooting ideas??


    Here's a video that shows how to properly load supplies into the gun. It's possible that the supplies aren't loaded properly..

    http://www.racoindustries.com/monarch-1130-1131-1136-labeler-loading-video.htm

    Dec 27, 2010 | Paxar Monarch 9825 Thermal Label Printer

    1 Answer

    Ok this stupid paxar 1131 gun is a pain in the ***, is there a video to show how to load this gun?


    Here's a video on how to properly load gun...

    http://www.racoindustries.com/monarch-1130-1131-1136-labeler-loading-video.htm

    Sep 02, 2010 | Paxar Monarch 9403 Thermal Printer

    1 Answer

    Monarch 9825 Thermal Label Printer: my monarch 115 pricing gun, the numbers reels gett...


    You may wish to have Avery Dennison, the folks that purchased Monarch/Paxar, to service your printer.

    Their phone number is 1-800-543-6650 and ask them the correct address for service. Your bands may be getting too loose, and need to be replaced. If it is something that they can instruct you to take care of, they can sell you the bands and provide instruction.

    May 06, 2010 | Paxar Monarch 9825 Thermal Label Printer

    1 Answer

    I have a Monarch Paxar 1115..I can not seem to get the paper to feed through. We just refilled the labels.


    http://www.theretailerscatalog.com/howto.asp

    Choose the 1115 operating instructions, and you should have the information you need.

    Feb 18, 2010 | Paxar Monarch 9403 Thermal Printer

    1 Answer

    How do I load tape in a Monarch PAXAR 1131?


    Instead of me explaining how to do this, Avery Dennison, the folks that now own Monarch/Paxar, have a site where you can either read a PDF or use one of their videos -

    http://www.theretailerscatalog.com/howto.asp

    Nov 12, 2009 | Paxar Monarch 9403 Thermal Printer

    1 Answer

    Is there a schematic for loading 1131?


    Instead of me explaining how to do this, Avery Dennison, the folks that now own Monarch/Paxar, have a site where you can either read a PDF or use one of their videos -

    http://www.theretailerscatalog.com/howto.asp

    Oct 08, 2009 | Paxar Monarch 9403 Thermal Printer

    1 Answer

    COULD YOU TELL ME HOW i CAN INSTALL THE TAPE PATH ON A MONARCH 1131 PRICE GUN it is driving me up a wall


    http://www.theretailerscatalog.com/howto.asp has a link to a video clip on how to do this.
    I know that sometimes that written steps and documentation, though helpful to some, is not as helpful where video can step in. Towards the top of the page, there is a video link, click that. Then click on the 1130 link and you should have what you need.

    Dec 05, 2008 | Paxar Monarch 9403 Thermal Printer

    Not finding what you are looking for?
    Paxar Monarch 9403 Thermal Printer Logo

    2,955 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Paxar Office Equipment & Supplies Experts

    kakima

    Level 3 Expert

    102366 Answers

    jasbo
    jasbo

    Level 3 Expert

    2237 Answers

    yadayada
    yadayada

    Level 3 Expert

    76649 Answers

    Are you a Paxar Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...