Does anybody have a rewiring diagram for the Thermador pgr366zs range control board from the old style to the new style EGO board?

https://www.youtube.com/watch?v=9sTs5rLfFek

https://www.repairclinic.com/RepairHelp/How-To-Fix-A-Range-Vent-Hood/106-115--/Thermador-Range-Vent-Hood-Fan-And-Light-Not-Working

https://www.kitchenaidparts.com/RepairHelp/Range-Vent-Hood-Repair/7-115--/Thermador-Range-Vent-Hood-Troubleshooting

manual
https://www.thermador.com/us/products-list/PH36GS#/Tabs=tab-5608894/

Troubleshooting starts page 11
https://content.abt.com/documents/81552/thermador_ph_ucg.PDF

Look for a diagram for the wiring inside the unit.

The new board may have the actuator relays and connectors on the main board. If so plug the wires in. If that is not the solution then you can call the Raypak technical support line and they may be able to direct you. Good luck.

FixYourBoard.com repairs this failure and back their work with a two year warranty.

Cannot Read Display or See Temperature Thermador RDDS30

Your best bet is to replace the board. ive actually not heard of anyone rebuilding a control board. To rebuild that board your gonna need a understanding of what each component does. . Personally I dont think its worth attempting to do. I do know that the board is costly. So whast can suggest is that you contact the manufacturer and see what they can do for you. If the range is less than a year old, most likely they will replace the control board at no cost to you.

i have thermador range model # REF30RS. my glass broke, i ordered the part, replaced the glass, but i do not remember where all the screwss go. where can i get a diagram?

Sounds like the spark module has been shorted out and quite possibly the main control board. Apptech.

I HAVE THE SAME PROBLEM. MY OVEN BINKS ONCE FROM BAKE AND TWICE FROM THE OTHER LIGHT. OVEN DOES NOT WORK, ADND WE REPLACE THE CONTROL BOARD ALREADY. WHAT DOES THAT MEAN?