Question about Canon imagePROGRAF iPF8000 Printer
Stops printing half way through page and says turn printer off then back on. Reset printer, was able to print 7 more pages then stopped again.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: I have my canon ipf710,
We have found to fix this problem the best option is to push the print head back to its home position (far right) and unplugging the printer for 1 min or so (just to make sure its memory has lost all awareness we messed with it). Then plug it in and it goes fine... The problem we used to have is the same many of you are complaining about it drains ink like a vampire whenever you have to restart it. To cope with this we have upgraded our firmware which has drastically decreased the amount of ink we waist due to less cleaning and agitating functions. Hope this helps out someone it took us a while to get back
Posted on Jul 05, 2011
This fault occured only when the cartridge motion on the axe faulty,Just clean the positioner plastic film behind the cartridge,clean the axe that cartridge move on with WD 4,"clean the polbearings"
Posted on Nov 02, 2011
Tips for a great answer:
Feb 28, 2015 | Canon Pixma MX922
Nov 17, 2014 | Canon imagePROGRAF IPF710 Printer
Aug 22, 2012 | Canon Pixma MP500 All-In-One InkJet...
1. Turn Off
printer, cable power still plug in.
Stop/Reset button, don't release the button.
3. Press Power
button by holding without release and than release Stop/Reset Button.
Stop/Reset button two times (2x) now release the Power Button.
5. Wait until
service mode to zero (0).
6. Turn off
the Printer, cable power still plug in.
Stop/Reset button, don't release it.
8. Press Power
button don't release & than release Stop/Release button.
Stop/Reset button four times (4x), wait until service mode to "1"
10. Turn off
printer, and loose cable power, wait for one (1) minute.
11. Connect cable power, turn on printer again, now this printer ready to use.
Aug 23, 2011 | Canon MX300 Office All-In-One Printer
Aug 11, 2011 | Canon imagePROGRAF IPF710 Printer
Mar 11, 2011 | Canon imagePROGRAF iPF710 InkJet Plotter...
Apr 14, 2010 | Canon imagePROGRAF IPF710 Printer
Nov 12, 2009 | Canon imagePROGRAF IPF710 Printer
318 people viewed this question
Usually answered in minutes!