Question about Sanyo Televison & Video
The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
Posted on Dec 03, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: HOW TO REPLACE THE INVERTER
All you have to do is to make a very detailed drawing with all the cables and their positions (label them to be sure), touch a metal part on the tv to ground yourself, take them out gently (be very careful not to rip a wire), unscrew the board from the chassis, ground yourself again and install the new one and plug the cables accordingly.
Posted on Sep 07, 2010
SOURCE: Lightning in area last night.
Yes if you are receiving the signal through your tuner then it could have damage the tuner, or the color processor is locked up do to the voltage surge, and if you leave the set unplugged from the wall for 40Min., it will reset back to normal, if not then the video board will have to be replaced.
Posted on Jan 21, 2011
Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary. ..
Posted on Oct 15, 2016
Tips for a great answer:
Jun 21, 2017 | Sanyo Televison & Video
Oct 15, 2016 | Sanyo Televison & Video
Aug 15, 2015 | Sanyo Televison & Video
Oct 07, 2013 | Sanyo DP32647 32 in. LCD TV
Aug 18, 2013 | Sanyo DP32647 32 in. LCD TV
Feb 24, 2011 | Audio Players & Recorders
Aug 13, 2009 | Sanyo Televison & Video
Feb 08, 2009 | Sanyo DP32647 32 in. LCD TV
34 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: