Question about Baby Lock Sewing Machines

2 Answers

My baby lock embroidery machine model BL60E.will not pick up the thread

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Baby Lock Master
  • 12,018 Answers

Be sure to use a brand new needle. If that does not improve the stitch, most likely the machine has been knocked out of time. You can search the internet for sites and videos regarding sewing machine timing or take the machine for service.

...

Posted on Dec 04, 2016

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 42 Answers

Make sure needle is fully inserted with the long groove to the front and the needle scarf(small indentation in needle) to the back. Otherwise it could be your hook timing, in which case you will need to have it serviced.

Posted on Dec 04, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

WHAT DO I DO TO GET MY BABY LOCK ELLURE ESL TO PICK UP THE BOBBIN THREAD?


You have your bobbin inserted into the machine spinning in the wrong direction. take the bobbin out and flip it over and wind around needle plate guide and cut. Look at the little pictogram on the plastic part of the machines throat plate. It shows which direction the thread should spin off the spool when you drop the top loading bobbin into the bobbin case.

Cheers,
Kelly
San Diego, CA
Embroidery Services

Aug 30, 2014 | Baby Lock Ellure

1 Answer

Bobbin thread shows on embroidery machine


Did you remember to put down the presser foot?

Nov 13, 2012 | Baby Lock Sewing Machines

2 Answers

Baby Lock Embroidery Sewing Machine "ELLURE" Model ESL- Problem: Defective Embroidery Memory Card (part#35205-4) used with the "PTS BOX" and the Palette Ver 1.0 Software Program to transfer embroidery...


I had the same problem and after buying a new card, found out that you get that message if the pattern you are trying to transfer is too big. reduce the size of the pattern and see if that works

Jul 11, 2009 | Baby Lock Ellure

1 Answer

Not picking up bobbin


http://www.babylock.com/embroidery/ellure/

Have you looked at your manual or bought the more expensive machine book from your dealer?
I wasn't happy at the addtional cost at the time (I spent $2200 US that day) BUT
I have found my book for my Evolve a VERY good investment (70 bucks, but worth every penny these past 2 years!) You may find the same for your Ellure.

Baby Lock have very good cust. service either on the web or right at your dealer. Most dealers will give free lessons upon your request.
I hope this helped, PS I'm a bit jealous.... I REALLY wanted that machine too!
Happy Sewing and Good luck with your baby!

Jan 23, 2009 | Baby Lock Ellure

2 Answers

Not picking up the Bobbin thread


Sounds like you have to take off the throat plate and clean out threads under it.  Sometime they ball up and prevent the needle from going down and catching the bobbin thread. You can't see themuntil you take off the plate.  Follow the directions.  It is easy.

Dec 28, 2008 | Baby Lock Ellure

1 Answer

Not picking up the Bobbin thread


I cleaned the machine good with canned air, oiled it. I took out the bobbin case and cleaned it good also. I then noticed the tension screw on the bobbin case was loose, tightened it and the problem was fixed.

Nov 14, 2008 | Baby Lock Esante

2 Answers

Tension on upper thread?


It sounds like the machine needs to be timed, seek out a sewing machine repair shop for this service.

Jun 07, 2017 | Baby Lock Ellure

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baby Lock Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1133 Answers

Chris Wetmore

Level 2 Expert

185 Answers

Jon Piercy

Level 2 Expert

67 Answers

Are you a Baby Lock Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...