Question about Samsung HLN617W 61" Rear Projection HDTV
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Most likely for this symptom is the lamp. If you'd like you could sit behind the set and have someone turn it on, you should hear the color wheel spin up and then you should hear the ballast try to fire the lamp, it makes a small arcing sound. If the lamp doesn't light the process starts over again.
Posted on Mar 27, 2009
When you replaced the color wheel it sounds like you took the DMD board out or you bumped it? Either way the DMD board will need to be realigned and that involves reaching into the TV while it is in normal operation. The DMD board in the one sitting right behind the digital bard and has a small fan facing the heat sink on it. There are three screws 2 on the left side on one on the lower right that need to be loosened just a bit and then with the set on you will have to move the board back and forth to achieve dead center. Remember from the back moving the board to the left moves the picture to the right and pushing down on that board will shift the picture upwards.
Posted on Oct 14, 2009
Bad Color Wheel.will cause this and it is a common problem for DLP Samsungs.
Part number is BP96-01103A
Samsung Parts 1-800-627-4368
Posted on Jun 24, 2011
Tips for a great answer:
Oct 01, 2010 | Samsung HLN617W 61" Rear Projection HDTV
Dec 01, 2009 | Samsung HLN617W 61" Rear Projection HDTV
Nov 06, 2009 | Samsung HLN617W 61" Rear Projection HDTV
Mar 10, 2009 | Samsung HLN617W 61" Rear Projection HDTV
Jan 30, 2009 | Samsung HLN617W 61" Rear Projection HDTV
Mar 26, 2008 | Samsung HLN617W 61" Rear Projection HDTV
Feb 24, 2008 | Samsung HLN617W 61" Rear Projection HDTV
41 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: