Question about Cannon Canon i960 Photo Printer
This always works in case you need your printer for Emergency ^_^.
Posted on Feb 13, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 04, 2012 | Canon PIXMA iP1000
Sep 05, 2011 | Canon PIXMA iP1000
4 You can remove the pads and the holder with a gentle pull.
5 Using a tissue, soak up as much ink as possible and clean the area around the waste
6 There is one more waste holder in the right back bottom of the printer. A kind of
sponge. There are few screws and plastic parts to be removed and this sponge needs to be
washed, dried and placed again. Be careful and patient. This is no understatement. On the
iP1500 this requires the dismantling of most of the printer. Take a photograph (even with your
cell phone) so you can trace back your steps. On the iP1500 the drive motor on the side (Just
behind the waste ink pads) has to be removed to get to the main sponge. You also need to
take care as you lift the slide/carriage. Below this you find 5 little springs.
7 Carefully replace the holder and the pads. Close printer.
8 Whilst printer is disconnected from the mains power, press and hold the power button
and reconnect to ac power.
9 Release the power button.
10 Press the power button again.
Aug 22, 2011 | Canon PIXMA iP1500 InkJet Photo Printer
1 Unplug power cord
2 Press and hold power button
3 Plug in power cord and switch on power - still holding power
4 Still holding power button press resume button 8 times
5 Release power button
6 Press power button to turn on
1 Turn off printer and disconnect power cable
2 Press and hold power button, reconnect power cable and switch power on
3 The indicator (LED) should be GREEN
4 Press and release resume button, still holding power button, the indicator (LED) should be ORANGE
5 Press and release resume button again, still holding power button, the indicator (LED) should be GREEN
6 Release power button
Oct 12, 2010 | Canon PIXMA iP1500 InkJet Photo Printer
Sep 09, 2008 | Canon PIXMA iP1600 Printer
Feb 16, 2008 | Canon BubbleJet i560 InkJet Printer
171 people viewed this question
Usually answered in minutes!