At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
We have a 13year JVC that when we use the remote, the red light comes on the t.v. and we hear a click, but the tv will not come on. We have turned it on in the evening and had it come right on with a perfect picture. We can not turn it on at the set, does the same thing. We have not been able to get it on for about 24 hours now. We have changed the batteries in the remote...help. After we hear the click, we will also hear another click sometimes.
Re: We have a 13year JVC that when we use the remote, the...
There is nothing to do with the remote or its battery,it seems you have an internal fault on it.You will require an expert to deal with this problem now.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
unplug the television...wait 10 seconds and then plug back in....if you listen carefully after 5-10 seconds you will hear a click sound (the same sound that you hear when you turn on or off) ...once you have heard it, turn the TV on again using the remote. Do not turn on until you hear the click. If this does not work, try again but turn the TV on again before you hear the click. I dont know why it happens but it is as if the TV gets confused as to whether its supposed to be on or off. Most of the time, the solution is to turn it on after the click so I would always try that first.
utencilio posted this fix. It worked for my JVC LT-42X579.
Okay, I found a fix! Called JVC, spoke to somebody there, here it is: 1)unplug the TV completely, no wall no power strips, completely 2)wait 10 sec 3)plug TV back in and Turn it on, the light will still be doing the same thing 4)wait 30 sec 5)ON THE TV, not the remote, locate the menu, volume (-) and power button. 6)while
simultaneously holding down the menu and volume (-) button, pressed the
power button ONCE and continue to hold the other 2 for 10 sec. 7)on the remote control, go to menu>settings>system info *** now this I know as a FACT will work on systems that display: JVC - ver.5.32FO001, but I don't know of any other versions*** 8)press the mute button on the remote twice 9)unplugg TV again and wait 10 sec. 10) plug TV in and turn on
It
SHOULD be working normally now... Thanx to the guys a JVC support for
this one, I know it seems like an obvious first place to look, but
sometimes it isn't. I for one checked online forums first
Your power transformer is likely shot. It'll cost at least $200 to have it replaced. Someone can come to your house to diagnose it. Usually costs around $65.
If you dont hear a click theres a problem in the standby power supply. if you do hear a click theres a problem in the Main power supply or sweep supply. Get a good tech to look at this for you if your not a tech. Good Luck
sounds like a power supply7 problem such as a power regulator is bad or maybe the Horizonbtal deflection cu8rcuity is defective. sounds like something if you ask me? should be taken care of by the pros??? Im sorry not being able to assist you better but these sets have hundreds of volts nin them and shoulnt be played with by an unauthoized service company.. Good Luck
×