Question about Computers & Internet

1 Answer

No any display & sound then i power on my PC my pc is intel 815t abit st6, red led is always on but no display? can any one help me??????

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,383 Answers

First check your num lock key led if it on and off when you press num lock then your cpu gives diaply to monitor perfact.
Then check your display connection from monitor to cpu.
When you power up the computer pressF8 ket then enter in enable vga mode.Then go to control panel -> display->property ->settings.
Then change screen resolution to 1024*768 then apply and ok .
But if you still not get dispaly then

-> Open cpu cabinet.
-> Refix RAM meory clean all dust from motherbord chip set .
-> pull cmos cell for 15 minutes.
-> Reattch ATX power supply to motherbord.
-> Refix processor it is bottom of processor fan.

Please rate my solution if it help you .
Thanks for using fixya.

Posted on Jul 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i connect the plugs


Here You can download manual: http://www.motherboards.org/files/manuals/2/st6.pdf,
in PDF file format; for connection, see page 8

Aug 06, 2013 | Abit ST6 Motherboard

1 Answer

Display off after some time


As you have checked all of the removable components. That only leaves one bit left. The motherboard. Check the capacitors around the CPU socket and the Power connector. There is a common problem with Socket 775 CPU it is that the contacts on the CPU socket can be badly connected even when the CPU is fitted and locked in.

Jul 26, 2013 | Intel Essential DG41WV Desktop Motherboard...

3 Answers

What does the red light mean next to the power button?


The red light next to the power button is usuall the hard drive led which should blink every time the hard drive is in use, there is normally a green or yellow light for the power that shoukld stay on constant when the computer is on.

Feb 09, 2010 | Intel Compaq EVO D500 (RBMDTCPQP42400) PC...

2 Answers

This motherboard is limited to 512Mb memory - is there a way to upgrade to allow more? ABIT-ST6


Sorry but this type of old motherboard has a limitation of having a 512MB of RAM as the maximum so there will be no way of upgrading it to a higher RAM, the best option that you can do is to change the motherboard to a new one....

Jul 31, 2009 | Abit ST6 Motherboard

1 Answer

LED on abit ST6


every motherboard should have a led light always on to indicate that there if power in it. the problem with system rebooting has to do with the ram or processor, since you said it does not recognize the hdd at times that means that the ram is working abnormally i.e it is week, u know ram means random access memory, so change the ram and make sure u get the right ram for your system

Jul 11, 2009 | Abit ST6 Motherboard

1 Answer

Abit st6 raid motherboard just beeps . doesn't boot BIOS


hello
the beeps comes from motherboard are due to ram which is not properly inserted
so try to remove ram while pc is off and insert ram again

Nov 21, 2008 | Abit ST6 Motherboard

1 Answer

Not switching ON


It turned out that the bracket on my video card was too long and when i was tightening it , it was bending and stressing the video card. put in some spacers and it is working fine now

Nov 16, 2008 | Abit IP35P Motherboard

3 Answers

Lost my user's manual


i get a new link from shuttle direct.

hier das manual:
http://download.shuttle.eu/Archive/Manuals/en/mk40v_n/
und die Treiber:
http://download.shuttle.eu/Downloads/Mainboard/MK40V-N/

Nov 14, 2007 | Abit ST6 Motherboard

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...