Question about Asrock ALiveNF6G-VSTA (MB-ALVNF6G) Motherboard

2 Answers

START UP PROBLEM

My computer is not switching on in first time when i press the power button nither keyboard led got switched on , it need 4-5 turn on & turn off steps to get the display on. but the processor fan is on each time.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,383 Answers

You need to reset bios.
Open cpu cabinet and pull cmos cell from motherbord chipset for 15 minutes then all settings are factory defaults.
Aslo you can reset settings with jumper settings .
Refix your RAM memory. Refix processor.
Reattch ATX power supply to motherbord.
Thanks for using fixya.
Please rate solution if it helps.

Posted on Jul 20, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Open cpu cabinet and pull cmos cell from motherbord chipset for 15 minutes then all settings are factory defaults.
Aslo you can reset settings with jumper settings .
Refix your RAM memory. Refix processor.
Reattch ATX power supply to motherbord.
Thanks for using fixya.

Posted on Jul 04, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Macbook air switches on but only displays grey screen and a ? where the apple should be


SMC reset
  1. Shut down the computer.
  2. Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
  3. On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
  4. Release all the keys and the power button at the same time.
  5. Press the power button to turn on the computer.
    Note
    : The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
If this does not work, make contact with Apple store for free in shop evaluation and likely repair.

Feb 16, 2014 | Apple MacBook Air

1 Answer

When I want to print it says error 6C10 switch off switch on. Doesn't work!


that indicates full waste ink pads/absorbers. to reset the counter try this:
1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button.
(DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)
2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.)
3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and
Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light
alternately, Alarm in orange and Power in green, starting with Alarm LED.)
4) When the Power LED lights in green, press the Resume/Cancel button the specified number of time(s)according to the function listed in the table below. (Each time the Resume/Cancel button is pressed, the Alarm and
Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)

any way if the absorber/pad is full, it have to be cleaned!

Sep 20, 2011 | Canon PIXMA iP4600 Color InkJet Photo...

2 Answers

I have a sharp aquos lc-c4677un its not turning on at all now. When I push the power botton on the tv, the power light turns on and about 2-3sec the power and opc light start to blink and thats about it.


How are the power and opc lights blinking? Do they blink simultaneously or does one blink then the other? How many time do they blink per second? Also have you had it fixed yet? and if so what was done? I had a similar problem with my set.

Aug 06, 2011 | Sharp AQUOS LC-C4654U 46" LCD TV

2 Answers

Turn on wireless


To turn the wireless on on your laptop:

1. Click on Start. Type Mobility in the Search box. Hit the enter key.

2. In the Search results under Programs you will see Windows Mobility Center. Click on it to open it.

3. You will see a button under "Turn Wireless On"

4. Click on it to enable your wireless.

Another way using a keyboard shortcut: Press the fn and F2 keys at the same time.

I hope this helps you-Thanks for using Fix Ya.

May 02, 2011 | HP Pavilion dv4000 Notebook

1 Answer

When turn on MacBook air the screen is blue.I can't get into any icons.


Try to reset your SMC (System Management Controller) p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px Helvetica; color: #1a1a18}
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 10.0px Helvetica; color: #1a1a18} span.Apple-tab-span {white-space:pre}

1. If computer is on, turn it off by choosing Shut Down from the Apple menu.


2. Connect power adapter to computer and to a working power source.


3. On built-in keyboard, press (left-side) Shift-Control-Option along with power button just once. Important: Use Shift-Control-Option keys on left side of keyboard.

Note: When the LED on the MagSafe connector is orange/amber, resetting the SMC will change it to green for a few seconds, indicating that SMC was correctly reset.


4. Wait 5 seconds and press power button to start computer.


If it starts without beeping errors reset the PRAM (Parameter RAM)


p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 10.0px Helvetica; color: #1a1a18} span.Apple-tab-span {white-space:pre}

1. If computer is on, turn it off by choosing Shut Down from Apple menu.


2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in Step


4. Note: If keyboard does not have an Option key, use Alt key instead.


3. Press power button.


4. Immediately press and hold Command-Option-P-R keys.

Important: You must press this key combination before the gray screen appears.


5. Hold down keys until computer restarts, and you hear startup chime a second time.


6. Release keys.



p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px Helvetica; color: #1a1a18}

Dec 31, 2010 | Apple MacBook Air

1 Answer

Screen locks on start and computer does not


ur OS may be corrupted...
u need to reload OS or
try to do this...
power off the machine
switch off power supply/remove power cable from wall outlet.....remove the power cables...from PC power slot.......keep pressing the power on button in the PC for 3-4 mins....WITHOUT POWER....and/or
press the PC switch on button and release it after few seconds many times.....
Power in RAM is locked...and it's locked ur Windows DLL files....

Dec 14, 2009 | ASUS Motherboard P5GC-VM Intel 945GC...

2 Answers

Computer wont turn on after 2 months of no use


clean the switch on/off connectors
give the motherboard a good clan with brush

Aug 18, 2008 | ASUS A8N32-SLI Deluxe Motherboard

2 Answers

Canon i70 LED


The problem is your wasted ink tank it either needs to be replaced or you need to reset the error code like this

Try This

1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button.
(Do not release the buttons. The LED lights in green to indicate that a function is selectable.)

2) While holding the Power button, release the Resume/Cancel button.
(Do not release the Power button.)
3) While holding the Power button, press the Resume/Cancel button 3 times, and then release the Power and Resume/Cancel buttons.
(Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)
During initialization, the LED blinks in
green.
4) When the LED stops blinking and lights in green, press the Resume/Cancel button 4 times (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)

After the function (menu) is selected, press the Power button. The LED lights in green, and the
selected function is performed. (When the operation completes, the printer returns to the menu selection mode automatically.)

*** 4 times Green Waste ink counter resetting Both the main and borderless print waste ink counters are cleared.

Dec 18, 2007 | Canon BubbleJet i70 InkJet Photo Printer

3 Answers

TV NO TURN ON


Hello erraez, I would suggest that you first get a schematic for this set (either call the manufacture or go to a sams photofact site and order one). It sounds like you have a powersupply problem, the only way to make sure is to have someone or yourself check the power supply levels to determine what is happening. You will also need a multimeter for this task. If you do not feel comfortable doing this you can lok for a shop on fixya.com or find one in your neighborhood that will look at it and give you an estimate on what is wrong.

Sep 08, 2007 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Need urgent help : staring problem with my IBM T21


Are you saying that it takes pressing the power button a number of times before it will start up? If there are no LEDs on (other than the power LED on the external A/C power adaptor) until pressing the power on button finally works then I suspect your power switch is defective. The only way to fix that is disassembly and replacement. Replacing the switch isn?t too hard however unless you have the tools, time and some experience you might want to consider taking it down to the local repair shop. If you have any more questions let us know and please don?t forget to rate this posting.

Mar 12, 2007 | IBM ThinkPad T21 Notebook

Not finding what you are looking for?
Asrock ALiveNF6G-VSTA (MB-ALVNF6G) Motherboard Logo

Related Topics:

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Asrock Computers & Internet Experts

David
David

Level 3 Expert

778 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Computer Links

Level 3 Expert

2385 Answers

Are you an Asrock Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...