How to reset Braun CT2s? - Braun Health & Beauty

If all the indicator lights are flashing after you've initialized your machine, reset it by turning it off and then on. If there's no disk in the brewing mechanism, all the indicator lights will flash.Sep 5, 2020

Braun Tassimo Coffee Maker Troubleshooting ' Hunker

Videos as well, or time for a new one?

https://www.google.com/search?q=Braun+Tassimo+lights+flashing

..

If your Braun Thermoscan 6022 thermometer is not switching on even after you have replaced the batteries, there could be a few possible causes:

1. Battery installation: Make sure that you have inserted the batteries correctly, with the correct polarity. Check the battery contacts for any corrosion or debris and clean them if necessary.
2. Battery type: The Braun Thermoscan 6022 requires two AA alkaline batteries. If you have used a different type of battery, such as rechargeable batteries, this could be the reason why the thermometer is not turning on.
3. Battery life: Even if the batteries are new, they could be defective or may have run out of charge quickly. Try replacing the batteries with a fresh set of AA alkaline batteries.
4. Reset: Try resetting the thermometer by removing the batteries for at least one minute and then reinserting them. This can sometimes help to reset the internal electronics of the thermometer.
5. Faulty thermometer: If none of the above steps work, it is possible that the thermometer itself is faulty. In this case, you may need to contact Braun customer support for further assistance or consider purchasing a new thermometer.

Fully charge the unit then turn it on and let it run until the batteries are fully discharged....do this cycle a couple of times and it should reset the display to be accurate with the charge on the battery.

https://www.youtube.com/watch?v=sf1wz4-Cpnc&t=215s

Watch this video to reset the device.

I have a Braun 7 series that I use occasionally. The last time I tried to charge was unsuccessful. After several days on the charger still would not charge, I discovered the RESET button right under the Braun name. The charger cable has to be unplugged, then press reset with a paper clip and now works like a charm. Note: reset will not work if charger cable is plugged in.

You can reset it very easily..here is the method...
There is a small button under LCD screen..If you push that button 3 times a message comes as "foil +cutter" push 4.th times than you will have a message"reset foil" and push again and keep pushing until flashing stops it gives "Reset OK" message..it is done..
That's all..
regards

You replace foil cutter, that braun complete 8975 replacement foil and cutter blades is braun series 3 combi 30B foil and cutter replacement pack.

there is a reset button directly underneath the LCD screen

Hi,unfortunately there is no way to reset this counter,even after replacing battery it still stands there.Braun somehow prohibits user and/or unauthorized repair men to do such action.If you visit the following link there is a official statement by Braun states that" total number of shaves (cannot be reset)."
I am sorry,this is the fact.
Regards
------------
www.service.braun.com/line/SH/S5646/S5646_3_CHIN_KOR.pdf