Question about Canon S900 InkJet Printer

1 Answer

My Canon S900 will not turn on. I have checked that it is plugged in, it is connected to a power board which has 3 other appliances running fine. I have pressed the power button numerous times with absolutely no response. What could fix this?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,306 Answers

If you can remove the printhead and try to power up, it may just be a bad printhead. It will power up without the printhead then you just need the new printhead, QY6-0039-000 around $60.00

Posted on Jul 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blocked in PAUSE


follow this steps and fix it. God bless you

Check Power
Check the outlet by plugging an appliance into the same outlet the washer was plugged into an running the appliance a hair dryer works good for this it will draw some amperage. If it works fine move on.

Control
To check the control remove the top panel and then remove the console to access the wiring to the control. Find the wire feeding the control from the main power cord. If you cannot visually see this refer to the tech sheet or service manual. Connect voltmeter to the 2 wires feeding the control if it is recieving power and it does not respond replace the control board.

Oct 23, 2013 | Washing Machines

1 Answer

The printer has flashing light, it rotates between yellow and green but never turns to solid green light, It does not accept any print job. Please advise


Issue: Power light (or Alarm and Power lights) alternate(s) between orange and green
Solution: The S900 may require repair

Unfortunately, the issue you describe seems to indicate that your product requires repair service.

Source:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/s_series/s900#ServiceAndSupport

You could try updating the driver, also available at the link above but the manufacturer's website seems definite that repair is in order.

Sorry for this news.

Dec 09, 2010 | Canon S900 InkJet Printer

1 Answer

On my ip2000 the power light flashes green then amber and turns itself off


Canon PIXMA IP2000
You may RESET the printer code first if you like or do it after you clean the pad
In some cases you may need to REMOVE THE PRINT HEAD FIRST or the reset code will not work. This was true of the S900 and i960 so, remove the print head first before doing this reset.
This is the correct code for the S and I (like i960) series of printers. (M series below this)
1) Power off printer
2) Hold RESUME button then press and hold POWER. (The beeper MAY sound once, or may not depending on your model.)
3) Hold POWER and Release RESUME.
4) Press RESUME twice then release both POWER and RESUME buttons.
5) When the indicator lights steady, press RESUME 4 times (for the S900, 3 times for the 8200 apparently).
6) Press power to set data.
7) Print away!
For other codes for other printers and more info go here to this big forum (but try the above first) Fix Your Own Printer Generally many of Canon's models use exactly this same code, the i models use the same code, all the s models use the same code.

Dec 01, 2009 | Canon i850 InkJet Photo Printer

1 Answer

S900. Amber power light flashes 7 times then green once. unable to get any further, any ideas please GG


Probably the waste ink tank is full.Try this:

Turn off the printer.

Press and hold the RESUME button, then press and hold the POWER button.

Release the RESUME button, then press and release the RESUME button two more times in succession. (youre still holding the POWER button during this). The printer mechanics will move momentarily.

You are now in Service mode.

Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.

1. service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)

After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.

Oct 07, 2009 | Canon Bubble Jet S900 InkJet Photo Printer

1 Answer

My canon Pixma MP780 suddenly would not turn on, after 3 years. Checked the cord, changed wall plugs, the lights flashed but then went dead. Help, pleeze


(1) Check the power cord
connection.
(2) Check the connection between
the SPCNT board (JPSU1) and
power supply unit.
(3) Replace the power supply unit.
That's what the service manual says for your problem!

Jul 06, 2009 | Canon PIXMA MP780 All-In-One InkJet...

1 Answer

S900 Ink Pad location


that item your talking about is actually the purge unit. The ink pad is actually below that and usually requires a repair tech to service and replace the pad. Contact Canon for a repaiir center near you.

Jun 18, 2009 | Canon S900 InkJet Printer

1 Answer

Canon S900 printer, 3 orange 1 green flash?????


Maybe the sensor are blocks by dust.Clean also ur cartridge,because ur cartridge was rest for weeks.

May 19, 2009 | Canon S900 InkJet Printer

1 Answer

Am receiving 7 orange blinks on printer Canon S900--book says bad printhead--is there a possible fix or does it need replacing?


1) Power off printer
2) Hold RESUME button then press and hold POWER.
3) Hold POWER and Release RESUME.
4) Press RESUME twice then release both POWER and RESUME buttons.
5) When the indicator lights steady, press RESUME 4 times.
6) Press power to set data.


Mar 21, 2009 | Canon Bubble Jet S900 InkJet Photo Printer

1 Answer

Cannon S900 not printing


Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Jan 09, 2009 | Canon S900 InkJet Printer

Not finding what you are looking for?
Canon S900 InkJet Printer Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1924 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...