Where is the reset button on sears air compressor #15364

yes ?!?!?!

According to the manual you need Use synthetic, non-detergent air compressor oil. you can get it at sears, Home Depot, Amazon.com

you can get the manual from this site

http://download.sears.com/own/spin_prod_683856201.pdf

There are manuals on this page, they might not be the model you want but they may help you to convert yours. Just scroll down the page http://www.about-air-compressors.com/sears-air-compressors.html

Hi jhuson396,

Welcome to fixya!

You will need to supply more information, like the Brand name of your air compressor and a complete model number. I did a search and found that Sears carries several air compressors with that model number under the Craftsman name. Is this the correct brand? Also, Sears model numbers are in the sequence ***.xxxxxxx and so forth, always 3 numbers a dot and then the rest of the numbers.

Please reply back with that information and I'll be happy to assist you.

Thanks,

Handie Andie

The pump used on your compressor was incorporated into different designs thus needed access to oil fill from one side or the other. Part number for oil plug was std-220 or 27642, but you can use just regular standard pipe thread plug with square head. If the oil plug fits the other hole. Buy plumbing parts at Lowes. Good Luck

Since the exact model number manual is not available go to Sears and look at the compressors they have on the floor (or in the catalog). Find one that looks like the one you have and note the model number (these devices haven't changed much over the years). order the manual for the one that matches your machine the best.

This link will take you to sears web site, where parts are available. I have linked you to the parts list. If this does not take you there, go to www.sears.com and click on the parts direct tab and enter your model number.

http://www.searspartsdirect.com/partsdirect/getSubComp.pd?modelNumber=106.154880&productCategoryId=0703000&brandId=0247&modelName=CRAFTSMAN-TWIN-CYLINDER-TANK-TYPE-PAINT-SPRAYER&diagramPageId=00001&documentId=00001361&pop=flush

Try a small engine repair shop, or even a industrail compressor repair shop.

Also look here for parts good luck

http://www.about-air-compressors.com/needs-some-replacement-parts.html

I can help you. The motor name plate will give you the connections for the different voltage if it is a 'dual voltage' motor. Check the name plate on the motor.
May I ask why you want to change it. Contrary to popular belief, It won't make it cheaper to run.


If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c

Many of Sears oilfree compressors were made by Devilbiss. Try going to this address http://www.devilbissparts.com/ and enter your sears part numbers. (example cac-4281 for valve plate) They will most likely have the parts that you need. Good luck and email if you have other questions about your conpressor.