Question about Computers & Internet

1 Answer

Booting up windows, now receiving "HID DATA has stopped working" msg respond "check online and close program" message box goes away and laptop seems to work fine anything to worry about? OS: windows vista 64bit

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,784 Answers

Hi. HiD Data is basically a control driver base located in the system 32 file bank. these drivers control mouse, game controllers and keyboard functions as well. Usually when this message box comes up, it is signaling a sudden change that may have occurred during a failed boot session or, sudden changes in the windows system 32 file base. these sudden changes can happen when there is a windows update that isn't quite compatible with the current version of one or more of the HID driver components or, if the OS has experienced a virus hit or , malware.

This may not be an issue at this time but, if the message box frequency level increases, i would recommend reinstalling the OS by using the repair option or, the restore feature.

Posted on Jul 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windows 7 Blue screen at start up. Shows "Starting Windows" then memory dump/ blue screen. Recovery = No points created by the owner. Roll Back = Tried the 3 points for installs which all still...


Hi,
Operating System does not respond is the major problem.
This is a very commonly faced error by the users of the Windows 7 which leads to the Blue Screen of death to the system. The error message appears on the computer screen in the following form: "Windows Operating System is not responding" along with two options one "Close the Program" and other "Wait for the program to respond". But whenever the user attempts to close the program he comes up with a serious data loss. To solve this problem apply different troubling shooting methods or take help of the technical experts.

Jan 12, 2011 | Toshiba Computers & Internet

2 Answers

Have presario 6000. Would not boot but received message that new keyboard needed. Purchased "universal" aftermarket keyboard. New message "Hard drive failure imminent" and still would not boot to allow...


Hi,
Prepare to Diagnose the Computer
Perform the following actions to prepare the computer for troubleshooting a startup problem.

1. Remove the battery and AC adapter from the notebook.
2.Remove any optical disks (CD or DVD), and disconnect any external devices or peripherals such as USB devices, printers, docking stations etc.
3.Plug the AC adapter directly into a functioning wall socket.
4.Press the Power button to turn on the computer.

NOTE:After the battery, optical media and peripherals are removed, the Notebook PC may startup normally. If this occurs see Windows starts after the battery, optical media and peripherals are removed .

Symptoms and Resolutions
When the notebook stops responding or displays an error message, let me know what symptom that most closely resembles what is seen on the Notebook PC screen.

* Screen is blank with no cursor or text
*An error message is displayed on a black background
*An error message is displayed on a blue background
*PC stops responding on a red Compaq or blue HP logo screen
*PC Stops responding on the Windows logo screen
* The Microsoft Windows 'Advanced Options Menu' is displayed
* PC stops responding with a blinking cursor is displayed in the upper left corner of a black screen.
*Password is requested but password is forgotten or lost.
*Microsoft Windows starts, but a 'serious error' message is displayed that prompts you to send an error report to Microsoft for evaluation.
* Microsoft Windows starts , but the PC stops responding or restarts automatically
*Display is very dim during and after startup
*Microsoft Windows starts, but runs abnormally slow

Jan 28, 2010 | HP Pavilion dv9000z Notebook

1 Answer

A problem caused theprogram to stop working correctly. Windows wi


Your problem is a little hard to say. Have there been any power outtages or has you computer been powered-off rather than the regular shut-down procedure. Windows registry and programs can be thus corrupted.

Also computer viruses can disrupt programs so please run for example
Mcafee's free online anti-virus to rule-out a virus problem.
http://us.mcafee.com/root/campaign.asp?cid=45694

Even if you have an anti-virus installed, it needs to be running the latest virus definitions.

You could also try in programs accesories system tools to select "system restore" and bring back your computer to a date where you understand the problem was not happening. (Try this one last)

Jul 11, 2009 | Computers & Internet

1 Answer

I keep getting the error message HID DATA has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Subsequently...


Go to the Microsoft Page to download the latest software here:  Download Software
Here is the long version of the link: http://www.microsoft.com/hardware/download/download.aspx?category=MK

Answer the 4 questions to download the correct version of software.  FYI: HID - Human Interface Device
Hopefully reinstalling the software will fix the problem.

Apr 27, 2009 | Microsoft Wireless Mobile Memory Mouse...

1 Answer

Ages of Empires II will not work on Vista on my laptop


All this bit is irrelevant

"Age of Empires II has stopped working" then in smaller writing it says "Windows can check online for a solution to the problem" it then gives me the choice of checking online or closing the program, I click the "Check online for a solution and close the program" option, it then comes up with another window telling me "Windows is looking for a solution for the problem"

This is just a message saying Winderz has no idea what is going on and doesn't know how to fix.

Vista is the pits. You need Windows 7 at least. Is this Age of Empires a bootleg copy on DVD or CD by any chance? The disc is corrupt.

Mar 29, 2017 | Microsoft Age Of Empires II: Conqueror 2.0...

1 Answer

Cant connect usb mini adapter/ hid data stopped working error


Hi, My Name is Henry. I am one of the technicians here.

What windows are you using?

Please do not forget to rate my solutions to you.

Regards
Henry
http://www.clickpcrepair.com

Mar 19, 2009 | HP Pavilion dv6000z Notebook

2 Answers

Job Status Window Interface has stopped working.


The issue usually occurs if you are using windows xp drivers on a vista machine. It's strange that the error does not come up when printing from internet explorer 7.0.

There is a file on support.dell.com that you can run to remove any xp drivers and then run the vista installation file. that should take care of these error messages from the operating system.

you can copy and paste the following links to download and run the files :

Patch file to remove xp drivers:
http://support.dell.com/support/topics/global.aspx/support/downloads/en/downloads_splash?c=us&l=en&s=gen&~mode=popup&file=224499

Driver for vista
http://support.dell.com/support/topics/global.aspx/support/downloads/en/downloads_splash?c=us&l=en&s=gen&~mode=popup&file=203951

Feb 17, 2009 | Dell A960 All-In-One InkJet Printer

1 Answer

Com surrogate


First check if you have nero or Divx installed. Then uninstall it.

Right click on Computer, and choose Properties
clip_image0021.jpg Click on Advanced System Settings, and then under Advanced, click Settings
clip_image00211.jpg Select the "Data Execution Protection" tab, and then click “Turn on DEP for all programs and services except those I select�
clip_image00221.jpg Click on the Add button, and then browse to C:\Windows\System32\dllhost.exe as shown
clip_image00231.jpg Click Open, and then OK.
Here's what you should see…
clip_image00241.jpg Now you can browse video folders without problems!

Feb 02, 2009 | HP Compaq Presario F750US

1 Answer

Texting


check your msg center number and see if it the correct one

Jun 03, 2008 | Nokia 6120

1 Answer

Aspire 5610-2762 Orbicam not working


Hi uninstall the Cam application software from add/remove programs and reinstall the same .

May 06, 2008 | Acer Aspire 5050-3242 Notebook

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...