Question about Scunci Vacuums

1 Answer

I bought a small 5 inch scunci vent brush about 6 months ago at a Raley's store and lost it and need to buy a new one and now they don't sell them anymore. How could I get one?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 109 Answers

Have you looked on the web? That's how I find everything I need that isn't in current production or not carried by my favorite stores any longer. Most manufacturers list their larger vendors. If a vendor (retail store) is not close to you, email them and they will tell you where you can get one, or may possibly sell or give you one as a gesture of good customer relations, directly.

Posted on Jul 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Walmart return policy


It probably has hair and dirt in the endcaps which has seized the brush roll. You will need to. Buy a new brushroll and. Belt

Jul 31, 2014 | Bissell Cleanview Helix Upright Vacuum...

1 Answer

RONSHESTACK@AOL.COM


Scunci International
2200 Byberry Road
Hatboro,PA 19040
Google search should provide a lot of options for obtaining the brush's but don't forget EBAY as it has been sometime ago but I had bought brush's for my steamer threw then. Good Luck!

May 25, 2014 | Scunci SS1000 Handheld Steam Cleaner

2 Answers

I need replacement parts for my Scunci SS-1000 Steamer


hi i need this part for my scunci steamer model ss-1000 this is internal parts inf to dannacielcr@hotmail.com thanks

need-replacement-parts-scunci-ss-1000-fh1b3pqu5kjb2g3wwmmsoxpm-5-0.jpg

Jun 04, 2010 | Scunci SS1000 Handheld Steam Cleaner

2 Answers

I have a Pro Steam Scunci Model PS-3888, Portable household steam


I own the PS 3888 and am just about to sell the entire unit at a yard sale. I would be glad to help you out but I think the mailing cost of the machine would be prohibitive.

Mar 07, 2009 | Scunci 52067 Handheld Steam Vacuum

1 Answer

Need instruction manual


a few steps down in Google, I found the whole manual in adobe format! I only need the filter for vacuuming, so I'm in the clear---except that it won't spurt soapy water out...I just squirt it on with a spray-bottle and use the brush and suction from the cleaner. Sorta fixed the problem but I'm desperate to get on with cleaning this very small area (an RV)

Nov 13, 2008 | Bissell 1697-7 Powersteamer Pro Deluxe...

1 Answer

Scunci SS 1000


The steps to correct it: The thumb trigger and the sliding brass valve clog up and don't move. So if you use it and press the thumb trigger and no steam comes out, it's probably clogged.

Wait until it cools down. Empty the unit.

1.) unscrew any attachments and you will see where they screw in at the end, two small philips head screws on the end. remove them. The red rounded piece at the end will come off.
2.) now on the top, unscrew the water stopper top where you poor water in.
3.) Now below that is a round rubber piece that surrounds the threaded part where the stopper top screws on to. Grab it with your fingers and lift it up on the sides to remove it.
4.) now underneath here you can see two screws. Remove them.
5.) now grab the whole top piece that is "black" and pull upward to remove it. you may want to start at the front and work it off. It has a few snaps that will release when pulled. I have done this a few times so dont be afraid to pull this piece off.
6.) now you will see the valve assembly. Take a small hammer and tap on the small rounded "brass" nub that is sticking out of the "trigger side" of the valve. To know if it has released, I usually place my lips around the end that the steam comes out of and blow while pressing in on the little brass nub on the other side. I do this until that nub moves freely and I can hear the air escape out the top from my blowing on it. Sounds funny but it works. If not free, tap it harder, a few more times, until it is free. It will free up eventually. It gets stuck from time to time but this will get you back in business fairly quickly.
7.) move the nub a few times to ensure smooth movement.

Re-assembly

1.) The black plastic top will snap into place. Just line up the trigger spring with the red nub and snap the whole black piece back into place.
2.) place the two screws back in.
3.) The rubber protector ring is tricky. You will see the underside has a rubber edge that snaps in place. Work it around as best as possible and i usually use a screw driver to push the last little bit into place.
4.) place the red circular end cap on and the two screws that go with it.

you are all done. Once you do this a few times, you will become a pro OR as the above poster said, use distilled water.

Oct 08, 2008 | Scunci 52000 Handheld Steam Vacuum

6 Answers

Scunci steam cleaner not spraying steam


Unscrew the screw on the handle and remove handle. Remove rubber where top screws on. Remove two screws and the top and now unscrew the black pipe where the steam comes out. Now remove the button and see the small metal protrusion on the pot where the button was. Hit it with a hammer a few times softly to remove the scale buildup until the metal starts moving in and out again. I also sprayed it with a little silicone spray. Now put everything back together again. My steamer now works beautifully again!

May 24, 2008 | Scunci 52067 Handheld Steam Vacuum

2 Answers

Hoover Vacuum Encore Supreme


You can try thehooverstore.com, or call a repair shop and I am sure they can order for you. Doubt that you will find a (#56511A01)manual tho. The hose part #43434268 and will sell for around $15 to $20. Dusting brush #43414145 $8 to $10. Extentsion tube #38634678 about $5. Furniture nozzle #38614029 about $5. Crevice tool #38617024 about about $5. Hope this helps.

Mar 03, 2008 | Hoover Encore Supreme Energy U4293-930...

Not finding what you are looking for?
Vacuums Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Scunci Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18407 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

ray gallant

Level 3 Expert

46218 Answers

Are you a Scunci Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...