Question about Samsung DVD-P181 DivX DVD Player

1 Answer

Remote dead. my remote is suddenly dead. I've changed the batteries, but it still does not want to work.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Samsung Master
  • 1,667 Answers

A common problem is that people tend to be rough on remotes. Dropping a remote is the most common cause of failure. This will sometimes crack the circuit board. Depending on how the board is damaged it may not be serviceable.

Sometimes, but on rare occasions, the Infared transmission diode becomes defective, or the frequency crystal fails. A TV service center can fix this if they can have the parts. Normally remotes are not supported by the manufactures for service. They will tell you to order a new remote from their parts distribution.

Jerry G.

Posted on Jul 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV remote won't work after changing batteries


When battery is changed, all the previous settings will be lost from the remote control. You should once again set it to your device, using codes.

Jan 10, 2013 | DISH Network Televison & Video

3 Answers

Remote stopped working


clean the circuit board on the remote moisture might be the problem

Aug 14, 2008 | Philips DVD750VR DVD Player/VCR

1 Answer

Remotes suddenly stop working #85095-01, and FCC ID IN2TX13


1) clean the contacts batteries, with cleaner contacts
2) tight the spring contacts with pliers for better contacts
3) resolder the wires connector from contacts batteries
4) open the remote c, and clean the keypads with contacts cleaner
God bless you

Jul 02, 2012 | Hunter 27185 Remote Control

1 Answer

The remote won;t work


If it's a "Universal" remote and you've changed the batteries, you'll need to reprogram it according to the make/model of the remote. A remote that came with your receiver....

1. Check batteries, they may be dead or dying.
2. Is something blocking the remote receiving window on the receiver?

Remotes use infrared light to transmit to their matching devices and MUST have a line-of-sight path to work properly.

Apr 13, 2011 | Audio Players & Recorders

1 Answer

My remote just died. It was working and then went dead. What just happened? The batteries are brand new!


The remote CPU probally shorted is dead.That,why it just suddenly stop,working all together.Try website like Remotes.com to buy an exact remote to the original remote.

Oct 23, 2010 | Polaroid 1720-7 Remote Control

2 Answers

My remote is suddenly dead. I've changed the


remove the batteries. press any two buttons simultaneously for 2-3 minutes to reset the control. reinstall batteries and should work. this is in the owner's manual as well

Jun 08, 2009 | Samsung DVD-P181 DivX DVD Player

3 Answers

My Sharp Remote Control Is Suddenly Stop Working


Ok I just dealt with the Sharp customer support for this problem.

1) You need to unplug the TV for 1 full minute and remove the batteries from your remote aswell (this will reset the system)
2) Hold the power button on the remote for 30 seconds with the batteries still out of the remote and the TV still unplugged
3) After the 30 seconds replace batteries then press every button on the remote beginning with the power button in order from left to right and top to bottom (same way you read)
4) Then plug your tv back in and try the remote again.... and the remote and TV should be back in sync.

Aug 03, 2008 | Televison & Video

1 Answer

Coby 626 DVD Player Remote Not Working


I have a COBY DVD player TF-DVD7005 that hadn't been used in a while. When I charged the battery and the light went from red to green, nothing happens when I push play and the DVD doesn't spin. Could the battery be dead despite the green light and where would I get a new one?

Mar 18, 2007 | Coby DVD-224 DVD Player

Not finding what you are looking for?

Open Questions:

Samsung DVD-P181 DivX DVD Player Logo

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74243 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...