Question about Efficient Networks SpeedStream 5667 Modem

1 Answer

Ethernet light flashing

My ADSL modem with Ethernet light flashing while DSL & power light stable. I couldnt get connected to internet. i checked LAN status, there is sent signal but receive signal very weak. What could be the possible problem & how to fix it?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 52 Answers

Check your DSL Filters on your house phones or anything connected to the phone line EXCEPT the modem. The modem should not have a filter on it. If this doesnt help I would recommend getting your ISP out to test the line because sometimes the resisitors or hardware in the box goes bad or at the DSLAM.

Posted on Jul 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wt8951nd


Power cord
RJ-11 telephone cable coming from a splitter or the extn. line of your landline phone.
Ethernet cable coming from your Desktop/Laptop connecting RJ-45 port
Most standard ADSL modems have four/five lights in the front :
Power light to indicate electric power to the modem.
ADSL light indicates the status of ADSL sync. When the modem is synchronized with the ADSL line card at the other end of the circuit/loop, the DSL light will be steady green.
LAN light will glow steady green when the modem detects a successful link to a computer or router ethernet port.
ACT i.c. Activity light glows when the modem is sending and/or receiving data on the lan and wan. It will vary between very slow to fast flashing and steady green to indicate lan/wan traffic.


for more help visit CBR Tech Solutions

Feb 08, 2014 | Computers & Internet

1 Answer

My modems LAN light is blinking and I can't get Internet, I've tried unplugging it, but the problem still exists, please help


There will be 4 lights...

Power
Dsl
Internet
Ethernet

Power light indicates power supply is good...
Ethernet light indicates connection between modem and computer is good...
DSL light indicates connection between modem and telphone line is good... Also DSL light should be steady and it should not flash...
If it flashes then it says there is a lot of noise in telephone line...
Internet light says whether the internet status is connected or not...Internet light can flash depending upon the internet activity...

Feb 03, 2011 | Paradyne 6381 ADSL2+/ReachDSL Router...

1 Answer

Unable to connect to internet. Only two lights show -- power & dsl. When I called for help I was told I needed a new ethernet cable. Bought that & installed. Same problem -- only two light lit...


In all there should be lan led, dsl led, power led and internet led,
So if dsl and power led is glowing and others not?? than check the lan cable and even check the lan card of ur pc is it enabled or drivers are properly installed and same way try to check the modem configuration??

Sep 08, 2010 | Siemens SpeedStream Modem (4100) (SS4100)

1 Answer

D-link dsl 320b lan light


Maybe it is ethernet driver

Apr 23, 2017 | D-Link DSL-2320B

2 Answers

My linksys router keeps dropping connectivity to the internet


does your router and your landline phone is in one connection in with a splitter..
does connection failed whenever there's a call?
if so your splitter might be broken
or you must insert your phone line with the splitter, it might be in your connection set up..
or make sure your utp cable is stable and not in exposure area of people or pet where it might be touch or something..

hope this helps...

Jan 13, 2009 | Linksys BEFSR41 Cable/DSL Router W/4 Port...

1 Answer

Internet


Well, I understand that the modem is SS4100, which means ther are
5lights on it being, Power, Ethernet, DSL, Internet & Activity....
Note:The trouble shooting is done according to the Light Status on the modem.
1. No matter what the proble is, the first step is to Power Cycle the modem to eliminate the static on the modem(to switch it off and back on).
2. If the Power Light is anything other than a solid green, then the modem is fried(except the fact that the adapter is plugged and working).
3. If the Power is green and Ethernet is off, then check for the LAN cable at the back 
of the computer if its connected to the modem.(It turns green if connected properly)
4. If the DSL light is anything other than solid green, then call up the ISP tech's to ask why the intenet is not working.
(make sure the DSL cable is plugged firmly onto the back of the modem and the wall jack)
5. If the Power, Ethernet and the DSL is green and the internet is not, the open up the Modem page(type 192.168.0.1 in the address bar and enter for the modem page), and cross-check for the username and the password. Save the changes and your internet is working!!!
6.  The Activity light usually blinks green and it does't have much to do with the troubleshooting.
The above are the basic troubleshooting steps.
Hope it solves your problem......

Dec 20, 2008 | Siemens SpeedStream Modem (4100) (SS4100)

1 Answer

Belkin modem


your modem is not the same...... the red/green arrows does not apply as it is for the other device

you need to log into you modem (the quick setup guide will tell you how to do this)

the status page will tell you if you are connected on adsl (there is also a link light on the modem itself which goes solid on (not flashing) when connected properly

if on the status page it is not reading as connected you need to check your logon info and check the logs to see why it is not connecting..

if it reports that it is connected, then there are a few system properties that you need to check.

open Internet properties (right click on intenet explorer, choose internet options) in the connection menu, choose "Never dial a connection" press Apply, then press "LAN settings" button and tick box "Automatically detect settings"

close Internet explorer then open internet explorer, it should spend a few seconds checking your settings then it should get out to the internet..

job done...

Oct 03, 2008 | Belkin Wireless Cable/DSL Gateway Router

1 Answer

X6 won't pick up DSL


hopefully you haev installed the software first on yoy computer>
turn off the computer. connect the phone line one end to the ethernet port on your computer and the other end to one of the LAN port on the x6.
power up the (power cube shipped with the X6), the Pwr and the WLAN should come on and become steady, the LINK light should blink,
turn on you computer, connect a new phone line between ADSL port and the wall jack, the LINK light should become steady.


please rate the answer if it solved your porblem.
thank you

Sep 09, 2008 | Zoom X6 (5590) DSL Modem (55900003)

2 Answers

ADSL Router DSL-G604T


all ADSL routers are very fussy when it comes to power fluctuations, even the tiniest can set them into error, first thing to try, is pull the power cord out of the back of the modem, wait a couple of minuteds, then plug it back it, give it a few moments to re-connect and see how it is, if no luck with that, check the DSL, or ADSL light is on and solid.. if so look on the bottom of the modem for an ip address, open internet explorer browser, type that ip address into the address bar and hit enter, it should prompt you for a username and password.. usually ADMIN for both user and pass.. then go to "status" or "diagnostics" depending on the modem, and it will give you a run down on any potential problem..

PPP error: username and password are wrong (Authentication Failure)

Jun 01, 2008 | D-Link DSL-G604T Wireless Router

Not finding what you are looking for?
Efficient Networks SpeedStream 5667 Modem Logo

596 people viewed this question

Ask a Question

Usually answered in minutes!

Top Efficient Networks Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Laxman Bisht
Laxman Bisht

Level 3 Expert

656 Answers

richie46

Level 3 Expert

8014 Answers

Are you an Efficient Networks Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...