Question about RCA CC6272 VHS-C Analog Camcorder

Open Question

Where does the cable go

Where do you plug the cable in to connect your camcorder to the vcr

Posted by on

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

Need to transfer order VCR-C tapes to DVD How

You will need to borrow or buy a DVD-Recorder, either way it's best to follow the manuals instructions on how to connect your camcorder (external device) to the DVD Recorder for Recording to DVD. Most camcorders come with a set of AV (audio/video) Cables for this purpose. On your camcorder you will find a little rubber door that houses the terminals to connect your cables to. Depending on how old your camcorder is you will find a Yellow (video) and a White (audio) and on the newer ones that have stereo will have a Red (audio), all these connections are video and audio Out-Inputs and should be connected to the Video and Audio "In" terminals on the back of the DVD Recorder. Now make sure your battery is fully charged (It's best here to use an AC Adapter for your power supply instead of your battery, which also usually comes with your camcorder if bought new.) and that your VCR-C tape is loaded and completely re-wound. Now if you want to watch this on your TV while you are recording to'll need another set of AV Cables that come with a new DVD-Recorder, and hook these cables on the Out-terminals on the back of the DVD- Recorder and the other end of the cables to your TV's Video/Audio-IN terminals on the back of the set. Finally...Set your camcorder switch for Playback, turn on the DVD Recorder, And turn on your TV. Now you can go ahead and record all your VCR-C tapes to DVD! Any other questions? Contact me directly at

Jul 29, 2009 | Video Cameras

1 Answer

Video transfer not working

  1. connect VCR(recorder) to TV, select TV proper channel to get signal from VCR
  2. connect Mini DV to VCR, for example, you are using AV1 input on your VCR
  3. on you VCR, select channel(or input) to AV1, insert a blank tape
  4. turn your Mini DV to play mode and play, press REC on your VCR
you should get picture now.

May 08, 2009 | Panasonic NV-DS60 Mini DV Digital...

1 Answer

Recording from camera to VCR

1st setup ur VCD with TV and playback it to view on TV. If picture is coming, thats OK.
2nd plug ur camcorder in VCR input and select VCR input according to plug in and monitor the camcorder picture on TV through VCR. If its ok, now u r ready to record the picture from camcorder to VCR.

Jun 07, 2008 | Sony Handycam CCD-TRV308 Camcorder

1 Answer


You connect cable from camera to an adaptor cable with phono plugs in and scart out. Plug the scart connector to the vcr scart input and press record on vcr and camera. Remember to choose the scart input on your vcr.

Hope this was helpful, i can might make a drawing to explain if you need it.


do it you self blog

Mar 28, 2008 | Sony Handycam DCR-TRV350 Digital Camcorder

1 Answer

Canon ES55 camcorder

The camcorder has a port called "Audio Video Out". You need an adapter cable (Canon's cable is the C-250) to connect from this port to a television or VCR. Use the white RCA plug on the cable with the "Audio In" jack and the yellow RCA plug with the "Video In" jack on the television or VCR.
Canon's cable is available from their online store at

Feb 13, 2008 | Canon ES55 Camcorder

1 Answer

How to connect cords to camera, vcr and computer

Use the provided cable for your camcorder that includes either a rca (yellow, red, white) end or s-video, component, etc... then plug those into the input of your vcr.  you will need to select the correct setting on your vcr (possibly input 2) to view the camcorder.

Dec 21, 2007 | Sony Handycam DCR-TRV70 Mini DV Digital...

1 Answer

Connecting zr85 to vcr to record vhs tape to dv or sd card

I also have a Canon ZR-- left of the lens and the built-in microphones, there is a small panel that opens to reveal several ports. The middle yellow one is the AV In/Out. You can plug in the cable that came with your camera. One end looks like a microphone plug, the other has 3 RCA type plugs- red, white and yellow. These get plugged into your VCR's OUT plugs on the back of the VCR. Place a tape in the camcorder, open the LCD panel and push the REC PAUSE button. On the VCR, press the Play button. When the tape reaches the point you want to begin recording, press the camcorder's Play/Pause button. When you want to stop recording, press the Stop button on the camcorder.
This is also detailed on page 82 of your manual, manuals are available online at Your specific manual is at:
Hope this helps.

Nov 20, 2007 | Canon ZR85 Mini DV Digital Camcorder

1 Answer

Problem taping on vcr from panasonic nv-gs50

if you are using rca cables let the cam playing something you recorded and try find the channel on vcr(on its tuner).it would be helpfull if you post a picture of your cord

Nov 03, 2007 | Panasonic NV-GS50 Mini DV Digital...

1 Answer

Transfering from camcorder to VHS tape

1. Using the A/V Cables provided, connect the proper end of the cable to the Camcorder where labeled A/V Jack 2. Connect the other end to the A/V inputs on the VCR. (Location of A/V jacks may vary by model) 3. You must activate the video mode on your VCR. Look for a button labeled: TV/VIDEO, INPUT, SOURCE, LINE IN, LINE 1, etc. (For more information, consult the User Manual for the VCR.) 4. Once you are able to view the camcorder playback on your television, press Record on the VCR and play on the Camcorder.

Sep 06, 2005 | Samsung DouCam VP-D5000i Mini DV Digital...

1 Answer

Watching tapes on TV

To connect your camcorder to a TV (or VCR), you'll need audio/video cables. These need to be run from the VIDEO and AUDIO jacks on the camcorder to the VIDEO and AUDIO inputs on the TV (or VCR). Once cabling is completed, follow either of these scenarios: When connecting the camcorder directly to the TV, turn on the TV and tune it to the video input channel by pressing the INPUT button on your remote control. # When connecting the camcorder to a VCR that is already connected to a TV: Turn on the VCR and place it in the Line or Camera mode. # Operate the TV as you normally do to see the signal coming from the VCR. Select camcorders have an S-VIDEO jack, which offers higher video quality. Provided your TV or VCR has an S-VIDEO input jack, connect the camcorder to the TV or VCR using an S-VIDEO cable. Since the S-VIDEO cable only transfers video, you will also need to use an audio cable. Select the S-VIDEO input on your TV or VCR to view the signal coming from the camcorder.

Sep 06, 2005 | RCA CC-432 Camcorder

Not finding what you are looking for?
RCA CC6272 VHS-C Analog Camcorder Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Video Cameras Experts


Level 3 Expert

56836 Answers

Lawrence Oravetz

Level 3 Expert

7159 Answers

abdul rauf
abdul rauf

Level 2 Expert

383 Answers

Are you a RCA Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides