Question about M-Audio FireWire 410 External Sound System

1 Answer

Firewire410 Hi there,i use dual core processor and window xp and firewire410.Everything works good and my computer records the sound but when i want to listen to the music i recorded,the sound is not clear and i got checked out the firewire in another studio and it works perfect in another what is gone wrong?do you think i need windwos sp2 upated software to resolve the problem or is there any other solution.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has answered 200 questions.

  • Expert
  • 382 Answers
Re: firewire410

You should install service pack 2, the go to the m-audio site and upgrade the drivers again. Also, since your computer most likely have a 4 pin firewire, make sure you have the power cqble for the 410 connected. Ofcourse, do not have the 410 connected when upgrade either sp2 or the drivers. make sure you power cycle both devices before reconnecting and attempting to record....

keep me posted...

Posted on Nov 27, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Dear Sir MY LAPTOP OPRATING SYSTEM:ms windows xp professional(5.1,build 2600) system manufacture:hewlett-packard processor:intelr pentium r dual cpu my computer vedeo is working & not sound...

if your computer came with a motherboard disc the sound drivers could be on it
click start control panel administrive tools computer management device manager scroll to sound,video and game controllers you might see a yellow question mark? Right click to reinstall drivers or uninstall
click start control panel sounds and audio,volume,advanced,speakers make sure you have selected the
(((appropriate speakers))) also audio you will find 3 drop down lists make sure you have the correct settings there
click start control panel sounds and audio devices you can adjust the volume there also select speaker volume you can change your settings there you can also tick in the box place icon in taskbar
if his does not fix the problem

have you tried this control panel sounds and audio,volume,advanced,speakers select the appropriate speakers from the drop down list or navigate to the device manager scroll to system devices + to expand,system speaker right click properties then select use this device (enable) also you might check
the speakers plug/outlet is usually at the back of the computer you will have to open up the computer to check the lead attached to the rear of the input plug make sure the connection is good
try cleaning your computer of dust using a fine air blower from a compressor making VERY sure that there is no MOISTURE in the air line specifically around the sound card and the CPU central processing unit dust causes static to build up in a computer
make sure you have an earth ******** before touching any parts inside your computer
hope this helps

Apr 26, 2011 | HP (400745-001) Sound Card

3 Answers

Microphone connection

you just look whether you missed out any connection while shifting ........

Aug 23, 2008 | Edirol UA-4FX External Sound System

1 Answer

I have a compaq presario c700 running windows vista. On my previous laptop I was able to record successfully using Audacity. Now, however, recordings are very poor - the sound comes and goes, and is of...

Stuart, make sure have the System requirements Here are the recommended memory (MB or GB of RAM) and processor speed (GHz) requirements for using Audacity with different versions of Vista:

Version Recommended RAM/
processor speed Minimum RAM/
processor speed Vista Home Basic 2 GB / 1 GHz 512 MB / 1 GHz All other Vista versions 4 GB / 2 GHz 1 GB / 1 GHz
Note that the minimum system requirements as defined above (i.e. those that allow the operating system to run, ignoring what is required to run applications) are much greater than for Windows XP. If your computer does not significantly exceed these minimum requirements then you may have problems doing more intensive tasks in Audacity such as recording for long periods or editing a large number of long tracks, or may need to close other programs and processes before you can do so. Please be aware that the cheapest "deals" for new Vista machines may well only include the Vista Home Basic Edition and system specifications little in excess of the Vista minimum requirements.
Other things being equal, 64-bit versions of Vista will require more RAM than 32-bit versions. While some users report Audacity runs fine on 64-bit Vista with 2 GB RAM, this depends on the number of tracks being worked with and the number of other programs and services running on the computer. Memory is now very inexpensive. The general recommendation for 64-bit Vista is to install a minimum of 4 GB RAM - and for very best performance, install the maximum RAM that your motherboard supports.

If you meet the min system requirements. Uninstall your sound card drives and try the beta version for Windows Vista.


Jan 19, 2010 | Apple iMic, USB Audio Interface Sound Card

1 Answer

No Audio

Here is the link to the page for the driver for your audio. once you install this you should be up and running again. Hope this helps!!

Jun 28, 2009 | Intel Audio Cards

1 Answer

Can't install m-audio firewire

It doesn't 64-bit windows. (no driver) this is part of why people who are serious about audio tend to use macs.

You can install 32-bit windows, then the included drivers will work.

Dec 16, 2008 | M-Audio FireWire 410 External Sound System

1 Answer

Sounds from computer itself

there's no sound coming out of my computer anymore.
I've got a acer Aspire M3100 with AMD Athlon tm 64*2 dual core processor 4000+ 2.09 GHz 768MB of RAM

Aug 16, 2008 | Intel Audio Cards

1 Answer

Tascam midi and audio conflict error

First try turning off the onboard audio device using the BIOS interface. Try pressing f4, f2 or delete key rapidly at the flash screen beginning when you first turn on the computer. Look around in the bios (usually in "integrated periperals" area) and disable any onboard audio options that you see.
-In windows XP you can go to Control panel - Sound Devices and change the "map through" feature, select your default device, and run a hardware test simulation with a microphone for each device. Nice setup btw.

Feb 26, 2008 | Tascam US-144 Sound Card

10 Answers

No Sound

check the speaker or headphone are working fine may the pins is loose or somthing and also check the driver of sound card it is propely installed.

Sep 28, 2007 | Creative Labs Sound Blaster Live! 5.1...

4 Answers

Audio driver installation failed from mother board cd

The most common solution was this: open device manager click "system devices" disable "microsoft UAA bus driver for high definition audio" uninstall "UAA bus driver" make rescan devices (Note: Not all had this step. You may want to skip it.) D.W. install realtek driver the realtek driver includes the UAA driver too.Hope this helps.

Aug 29, 2007 | E-Mu 0404 Sound Card

Not finding what you are looking for?
M-Audio FireWire 410 External Sound System Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top M-Audio Audio Cards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Are you a M-Audio Audio Card Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides