Question about Garden

1 Answer

Trouble with cleaning solution in my Black & Decker Power Washer

Hello I have a Black & Decker Power Washer 1750 (PW1750). I am trying to use it to clean my deck before staining it. I've added the cleaning/water mixture to the reservoir but it doesn't appear to be going down as we pressure wash...we've tried to look for an obstruction but it's hard to see and check that. Any advice? Is there anything we should be doing differently?? Any advice would be appreciated!!!

J

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 47 Answers

Usually you have to lower the pressure at the lane for the detergent to come through as it works on a venturi principle.
can you twist or pull back on the lance to lower the pressure?
if you can take out the lance extension and run the machine you will see if that is tha cse as it should then pull deterrgent into the pump.
alternatively take the high pressure hose off the front off the machine and run it, this should also pull detergent in. if not you have an obstruction in the detergent pipe, blocked filter, regulator not open enough. or a worn injector.

Posted on Jul 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

User manual of black & decker model mx23pg


Hello, this is Ava with Think Crucial.

You may find the User's Manual for your Black & Decker model by clicking the link below.

Black Decker MY23PG Instructions Manual

You can purchase a wide variety of high quality Black & Decker replacement parts for your Black & Decker vacuum direct from Think Crucial with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10

https://www.thinkcrucial.com/collections/vendors?q=Black%20%26%20Decker

I hope this was helpful.

Ava B.
Think Crucial Customer Care
http://www.thinkcrucial.com/

Feb 27, 2013 | Black & Decker CTO6300 Toaster Oven with...

1 Answer

Bl400 drill black decker how old r they


Hello..Does anyone have a cure to why my black & decker BL400 drill suddenly decided to turn slowly.I found that very frustrating.Tried,opened it & brushes are OK.Please help anybody.Need solutions urgently.

Jun 08, 2012 | Drills

1 Answer

Power cord issues


Hello, To get your manual go to Black & Decker.com scroll down to manuals click add model number and product or call 1-800-554-6986,down load and print manual,hope this helps, ``

Feb 20, 2012 | Black & Decker Black Decker 18" Lawnhog...

1 Answer

A CH pressure sprayer PW175000AV Ser# 00842 was electrically taken apart without noting how wires were to be reattached. There are 4 male spade connectors on rocker switch which works fine. Power has...


Hello Woodnflies,

I understand that you need to rewire your pressure washer. I understand that you already have the switch wired and the motor wired as they are working. You need to power the pump that has a white (common) male and a black (hot) female. You what spade connections do you have open to connect too.

You should have a black and a white that have nothing attached to them this is where the pump wires are going to attache in the circuit.

Thank you for choosing FIxYa.com

Justin

May 05, 2011 | Campbell Hausfeld PW1750 Electric Pressure...

1 Answer

Gun


Replace the wand (Gun) The valve is not repairable.

Jun 16, 2010 | Campbell Hausfeld PW1750 Electric Pressure...

1 Answer

Need charging instructions for black & decker model sl1028 type 1


Hello. Use an ordinary extension cord and plug it into the back of the light and into the wall. Charge it for 20-30 hours, but not more than 30 hours. Here is the downloadable manual for future reference
http://demandware.edgesuite.net/aaea_prd/on/demandware.static/Sites-black-and-decker-Site/Sites-cpo-master-catalog/default/v1269899899597/dw_manuals/black-and-decker/bdknvec157bd/bdknvec157bd_manual.pdf

Mar 29, 2010 | Black & Decker Black And Decker 2 Million...

1 Answer

C/H 1750 Washer will not start with water connected. Electric motor will start without water connected.


HI I would think that your pressure switch has stuck.
You will need to remove the covers etc and check the internal pressure switch that will be situated on the outlet of the pump. It maybe stuck and just want greasing etc or may need replaceing.

Oct 30, 2009 | Campbell Hausfeld PW1750 Electric Pressure...

1 Answer

My problem is that I went to my local Canadian Tier to get help with ordering a part from you people and they have yet to here from some one at your customer service department it has been two weeks sence...


hello there sorry to hear about the problem you are having :
please try this link ok Black & Decker 13760901 TOAST SHADE SELECTOR KNOB
TOAST SHADE SELECTOR KNOB TRO700T/701T/700S AND 700B. Works with the following models: Black & Decker TRO700B, Black & Decker TRO700S. Black & Decker TRO700T, Black & Decker TRO700W, Black & Decker TRO701T.
[93 in stock] Price: $5.95 More details single_arrow.gif

Sep 14, 2009 | Black & Decker Kitchen Appliances - Others

1 Answer

Describe your Black &


I have a black and decker 100 watt power inverter. When the led turns red you are ethier overloading it or it overheated. to fix it unplug it and let it sit for 5 minutes. Plug it in. Plug in an item rated for 100 watts or less. Or try to charge somthing on the usb port.

Aug 23, 2009 | Black & Decker 100 Watt Plug-In Power To...

Not finding what you are looking for?
Garden Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers

roeb

Level 3 Expert

666 Answers

john h

Level 3 Expert

12761 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...