Question about Panasonic BL-C1 Network Camera

Open Question

Can't access my Panasonic BL-C111A net cam from external internet

I can access the camera internally, but that doesn't really help me since I got the camera to access externally. I have a SBC 4100 Speedstream DSL Modem and a Linksys BEFSR41 Ver. 4.3 Router. Cannot access it away from home on the private viewnetcam URL that was assigned to me, nor can I access it on an external IP address. I have called Panasonic and Linksys for support numerous times. Panasonic says it works for them. FYI, I have set my router to port forwarding and all concur it was done right.

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

yooperbud
  • 8637 Answers

SOURCE: I bought a Panasonic BL-C10 and a BL-C111a on ebay,need set up cd

I found a site for you to download the drivers for a BL-C111. The BL-CL10A is there to I beleive.
Copy this address to your browser and o there and download the driver.
Then
Normal 0 Try disconnecting the Camera from the USB port and install the downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Then to use it on the Web do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:

  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:
  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
C. Windows Live Messenger:
  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: You audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud


Posted on Jan 30, 2009

yooperbud
  • 8637 Answers

SOURCE: Can't connect to my BL-C10A camera from the internet.

Normal 0 I have had very good success using the "TEAM VIEWER" program which is FREE to use as a "Non-Commercial user and assigning a password when it asks you to do so. Only place a password on the remote computer not on the one you are using. After you get it installed on the remote and your computer you will be able to access it and control it remotely. If you have any problems I will try assisting you further. Hope this helps. Bud

Posted on Mar 17, 2009

rain_catcher
  • 267 Answers

SOURCE: I have successfully setup complete with netcam

ok i have tried to connect to it . yes its says it cant be found . try recreating the link using a diffrnt name .example > (koswemin1.viewnetcam.com) also make sure that you are spelling everything the same way as when you created the account.. if anything is diffrent it will say can not be found.

Posted on Nov 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HI everyone i have a panasonic BL-C1 network camera and it keeps flashing red and tells me to update the firmware. i tried downloading the firmware from the product site and everytime i update the camera...


might highly be due to wrong firmware of malfunctioning due to wrong firmware being installed might wanna recheck the firmware your getting is the exact right one for your model camera

Apr 22, 2017 | Panasonic BL-C1 Network Camera

1 Answer

I have lost the CD of Panasonic BL-C111CE network Camera software. I need the software to configure.. could anybody help me in getting the same software


panasonic.net/pcc/support/netwkcam/download/other.html

this is the link which guide you straight to site with all available software for your camera.

hope this helps

Aug 26, 2010 | Panasonic BL-C111CE Network Camera

1 Answer

How to configure the UPNP in panasonic camera?If we need access from the internet should we register in viewnet.com?


To access your camera from the Internet you will need to configure uPnP (or configure port forwarding manually) and register with some kind of dns service like viewnetcam (or know your home's external IP address assigned by your Internet Service Provider).

1. To configure uPnP on your camera, look in the network settings for an automatic network configuration option - this will trigger the camera to talk to your router using uPnP to set up port forwarding. The default for one camera is to use port 80 for the outside port and something like 192.168.1.253 for the internal network address (internal to your home only). uPnP will try to configure the second and third cameras to external ports 50000 or 50001. My router failed to configure the 3rd camera so I had to manually add a port forwarding option from my router's admin pages. To note, you can configure all port forwarding manually from within the router admin pages. Just list the internal network address to your camera (like 192.168.2.253) and specify a different port for each camera (like 50000 to 50000). You can then access your camera by typing in 192.168.2.253:5000

2. Then, you should register with viewnetcam.com. Adding your cameras on viewnetcam will give you access to them from outside your house without you having to know the IP address to your home network. You will simply type in your viewnetcam url with ":" and the port number (like username.viewnetcam.com:50000).

Note: When trying to access your camera from outside your home (or even pinging your router from outside your home), you need to know the IP address of your home. This is assigned by your Internet Service Provided and can change every time you reboot your modem. Services like viewnetcam keep track of the IP address to your home and update it automatically when it changes (your camera will communicate with Viewnetcam servers occasionally to update the IP address). All you have to remember is one constant URL (the viewnetcam url) and you can get to your cameras!

Aug 14, 2010 | Panasonic BL-C131 Network Camera

1 Answer

How to record transmission of BL-C131


Hi,

To view over the internet,
1. setup a wifi with internet active.
2. Insert the CD which came with the cam into your laptop which is connected to the wifi as well. Follow instructions. It is simple. If you need help, click here.
3. Make a new DDNS account if you don't have a static public ip (if you don't know what that is, you dont have one).

You are ready to go.

Cheers
TeaCii
Make more money with your website.
Real Guard to watch your cctv for a dollar.

Apr 05, 2010 | Panasonic BL-C131 Network Camera

1 Answer

BL-C131 port forwarding.


So you've configured port forwarding on the router. Do you have any anti-virus applications installed or have your set an exclusion in Windows firewall?

Feb 01, 2010 | Panasonic BL-C131 Network Camera

2 Answers

I bought a Panasonic BL-C10 and a BL-C111a on ebay,need set up cd


I found a site for you to download the drivers for a BL-C111. The BL-CL10A is there to I beleive.
Copy this address to your browser and o there and download the driver.
Then
Normal 0 Try disconnecting the Camera from the USB port and install the downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Then to use it on the Web do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:
  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:
  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
C. Windows Live Messenger:
  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: You audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud


Jan 26, 2009 | Panasonic BL-C131 Network Camera

1 Answer

No picture when using IP address on Internet Explorer


After you log in their should be a config screen.

Suppert can be found in Panasonics FTP server.
1000's of apps and manual for this camera and more.

ftp://ftp.panasonic.com/pub/Panasonic/cctv/downloads/

Aug 28, 2008 | Panasonic BL-C1 Network Camera

1 Answer

Can't connect to my BL-C10A camera from the internet.


Normal 0 I have had very good success using the "TEAM VIEWER" program which is FREE to use as a "Non-Commercial user and assigning a password when it asks you to do so. Only place a password on the remote computer not on the one you are using. After you get it installed on the remote and your computer you will be able to access it and control it remotely. If you have any problems I will try assisting you further. Hope this helps. Bud

Jun 28, 2008 | Panasonic BL-C10A Network Camera

6 Answers

Cannot see cam on viewnetcam


I had the same problem. Even tried turning DMZ on in my router, and specified the camera IP as one in the DMZ. What helped me was using a port scanner (do a google search). I then started trying different things until I saw the port was opened. Once the port was open, I was able to access the camera from the internet, even from within my internal network. It turned out my problem was I have Vonage VOIP phone service and the Vonage router was ahead of my network router. Apparently the Vonage router wasn't allowing internet traffic to the camera. I switched positions of the routers (my wireless router is now first, and my Vonage router is plugged into the wireless router) and everything works fine now.

Jun 10, 2007 | Panasonic BL-C30A Network Camera

Not finding what you are looking for?
Panasonic BL-C1 Network Camera Logo

Related Topics:

586 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Computers & Internet Experts

micky dee

Level 3 Expert

2724 Answers

Cindy Wells

Level 3 Expert

5100 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Panasonic Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...