Question about Whirlpool ACQ189XM Air Conditioner

1 Answer

Will not run, has power to board, no lights

Model acq249xr

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 233 Answers

Generally if you have power in and nothing out the board must be replaced, (sorry, probably not what you wanted to hear)

Posted on Jul 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is wrong with my TV? No picture but has sound. picture shows with flashlight.


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electro-medical.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Jan 08, 2017 | Televison & Video

1 Answer

I have a Toshiba 46l5200u that the backlight flickers and shuts off after about 15 secs.the set continues to run with backlight as long as no signal is applied to set


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electro-medical.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Jan 03, 2017 | Televison & Video

1 Answer

Have a 52" Toshiba Model 52RV530U has sound but black screen. Which board would need replaced to get it up and running.


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electro-medical.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Dec 06, 2016 | Toshiba Televison & Video

1 Answer

Vizio e390-a1-Black Screen/Power Light On. Is it the main board, eeprom or another piece of hardware that has malfunctioned? Is there some steps someone could run me thru to determine what has failed?


like Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electro-medical.blogspot.com/

To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Jul 10, 2016 | Vizio Televison & Video

1 Answer

My akira tv was running good all of a sudden picture disappeared can u pls help me out in getting back my picture


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis......
http://electro-medical.blogspot.com/

To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Apr 07, 2016 | Akira Televison & Video

4 Answers

I have a Element 32" HDS LCD TV, movel ELEFLX3210. It won't tunr on, but has a red light that is on. The TV was purchased 09/09/2007. Do you know how to repair or address this? It's a $549 TV.


There were two runs of parts on this model, one using a powersupply board that included the inverter and one with a separate inverter. The red standby light failure was typical with the second run with the all in one power supply board. You can tell if you have the second run by opening the back. If the power supply board says proview and is black then you need to replace the board underneath it. The main board. This model also had a MASSIVE factory defect. If you hook up the VGA model, pin nine on the control box lead shorts out and it goes into limbo like you have now. So, replace your mainboard and Fill the vga input with hotglue. That should get you back and kicking again. Try shopjimmy.com or ebay for parts.
Good luck

Aug 01, 2009 | Element Electronics FLX3210 32 in. LCD TV

1 Answer

Dishwasher acts like it isn't getting power.


If you have power to the board and no power out to components then your board has failed. Will need to replace board. Part#154635501 and sugg retail is about$100.

Jun 09, 2009 | Dishwashers

1 Answer

My central air unit is not cooling, but it continues to run. there is a little cool air, but not the normal coolness


hello i am sorry that I can not fix this problem but I have a question of my own. my mother purchased this air conditioner acq249xr and for got what she paid for it. do you remember how much yours cost. she wishes o sell it and need to know a good starting price for it.

Jul 17, 2008 | Heating & Cooling

2 Answers

Unit will not turn on


Our experience with that model has been defective motherboards. You can replace the board with a generic board if you cannot find the emachine board. You might have to reload Windows if you do.

Aug 14, 2007 | E-Machines T2865 PC Desktop

Not finding what you are looking for?
Whirlpool ACQ189XM Air Conditioner Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Heating & Cooling Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Bill Long

Level 3 Expert

588 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Are you a Whirlpool Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...