Question about Labtec Webcam Pro

1 Answer

Labtec webcam pro video works, not audio. system is x64 vista

Posted by on

  • WiFiNut
    WiFiNut May 11, 2010

    Please try another software to determine if the problem lies with your
    camera or the camera software. An example would be this one: http://sentilog.net/download.htm

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Go to Control Panel and Click on Sounds, Click on Audio, then Click on the Microphone. Then Click on the drop down and select Camera Microphone or Headset.
Click OK and it should work.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your Computer does not set it up to broadcast on messengers or Skype. Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:
1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
2. Then click on the Video Settings.
3. The camera if Installed Properly will come up and show a video picture.
4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able tosee and her to you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html) set it up as follows:
1. Go to Messenger at the top left and click on it.
2. Next go down to Preferences and click on it.
3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
C. Windows Live Messenger:
1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
3. Next go to the Menu Bar on right side, click on “ “Action.”
4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
D. AIM (AOL) Messenger
Go to this site http://dashboard.aim.com/aim and Launch AIM AOL Messenger.
1. On the VIM sign-in window click on Edit.
2. Then click on Settings Enhanced IM.
3. Next click on Enhanced IM.
4. Then click on Audio Video.
5. The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.

Additional information to use with VIM settings,

Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly. Follow the on-screen prompts.
Notes:
· The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly. Follow the on-screen prompts.
· images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud

Posted on Aug 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Please driwers for windows 7


on this page you can download drivers for Win XP and Vista.
http://www.labtec.com/index.cfm/service/listing/EUR/FR,crid=68,crid2=1764
Try the driver for vista, they could work with windows 7

Mar 09, 2011 | Labtec Webcam Pro

1 Answer

Where can I get a download for Labtec Webcam Pro


The software for the Labtec Webcam Pro can be downloaded from the link below. It is the last one on the page and you will need to select the desired operating system and language.

http://www.labtec.com/index.cfm/service/listing/EUR/EN,crid=68,crid2=1764

Jul 09, 2010 | Labtec Webcam Pro

1 Answer

Driver windows 7 for labtec webcam


http://www.labtec.com/index.cfm/service/listing/EUR/EN,crid=68,crid2=1764

Download the nearest driver to your operating system from the url above, if you are using 64bit use vista 64bit and same as 32bit

When you first install the driver it will give you an error message, "you cannot use the current version, dont worry the setup files get extracted to a directory:

C:\Program Files (x86)\Labtec\WebCamWebInstall\Drivers\x64 or similar.

Open device manager by entering the properties of my computer find the webcam in the list it should have an exclamation mark on it, right click on it and update driver, locate the driver from a file directory as above, it has 2 sub directories, you driver is in WIM64 or 32 depending on what your system is, and press ok, it should find the driver and install it for you.

I hope this helps and let me know how you get on.

Mar 23, 2010 | Labtec Notebook Webcam (961401-0403)

3 Answers

Can't get it to work on windows 7... any workarounds ?


want driver for my labtec webcam 5.1.0 for window 7 ( anthony )

Jan 26, 2010 | Labtec Webcam Pro

1 Answer

Problemtoinstall with Windows 7


I could not find the Windows 7 64-bit drivers on Labtec website. However, I would suggest to download & install the Windows Vista 64-bit drivers.

Here's how to download them:
1. Go to: http://www.labtec.com/index.cfm/service/listing/EUR/EN,crid=68,crid2=1764
2. Scroll to the bottom of the page to the section "Software for Labtec Notebook WebCam, Webcam Pro, WebCam Plus, plus SE and labtec® webcam".
3. From the "- Select Your Operating System -" drop-down menu, select "Windows Vista 64-bit".
4. From the "- Select Your Language -" drop-down menu, select "English".
5. Click on the "download" button to start the download.

Dec 05, 2009 | Labtec Webcam Pro

1 Answer

I need driver for labtec webcam 2200


Try to download labtec webcam 2200 driver from http://www.howtodrivers.com/model564879.html
and install on your system then webcam will work fine.
or
Download the driver from http://driver-pro.com/related/english/hardware-drivers/?gclid=CJCLuYHnm5oCFRaA3godaiJv9g&hit=1&adurl=15291
and install on your system after that it will work fine.

May 01, 2009 | Labtec Webcam 1200

1 Answer

Labtec webcam just has a black image


Normal 0 Double click on this site
http://www.labtec.com/index.cfm/service/listing/EUR/EN,crid=68,crid2=1764
to down load Labtec Camera Drivers.
Then
Disconnectthe Camera from the USB port and reinstall the CD or Downloaded softwareprogram. When the program asks you to connect the camera to theUSB port, do so and it should work.
Then to use it on the Web, do this.
Web Camera’s have to besetup on the program they are to be used with. Just installing the cameraon your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order forthe Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:
  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Yourfriends and Family will now be able to see and her to you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html) set it up as follows:
  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
Hopethis helps. Bud

Mar 19, 2009 | Labtec Webcam Pro

1 Answer

I have acer vista pc. and labtec +mic cam is working but no saund


I put my webcam into the slot green lite was on then it went off n will not come back on

Feb 19, 2009 | Labtec Webcam Plus 0403

1 Answer

Web Cam Mic


Normal 0 Go to Control Panel and Click on Sounds, Click on Audio, then Click on the Microphone. Then Click on the drop down and select Desk Mike or Camera Microphone.
Click OK and it should work.
Hope this helps. Bud

Jul 26, 2008 | Labtec Webcam Pro

Not finding what you are looking for?
Labtec Webcam Pro Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Labtec Computers & Internet Experts

micky dee

Level 3 Expert

2658 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a Labtec Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...