Question about Zenith R49W36 49" Rear Projection HDTV

2 Answers

My Zenith rear projection tv. is displaying a 3d image.

All we did was disconnect the cable and when it was reconnected it showed a 3d image. I was told to do an auto conversion. After i did that the problem got worse and now you can barely see the picture and it is at a wierd inverted angle. What can i do to fix? How much will it run me?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: My Zenith rear projection tv. is displaying a 3d...

Thanks That was the problem. It cost around $400 bucks to repair it.

Posted on Apr 09, 2008

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 50 Answers
Re: My Zenith rear projection tv. is displaying a 3d...

Is picture bowed at top and bottom? sounds like convergance problem. Usually the IC's IC2701 and IC2702 along with 1 ohm resistor R2095 and check C2702

Posted on Nov 21, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My rear projection television is showing a double picture with the blue out of allignment. It also shows a bow on the top and a bow on the bottom.

The tv have a problems known as a convergence problems,tv convergence board it is dead.Tv have R,G,B colors lines mis alignments,have colors pictures shadows or 3D pictures look alike?Yes.The tv convergence board it is dead.Must require replacing 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board to solved the tv picture convergence problems.The tv shop,will cost u like $300-350 for parts and labors.

Apr 24, 2011 | Zenith IQC50H95W 50" Rear Projection...

1 Answer

Turn on tv have sound and picture then screen turns blue no picture but have sound

Blue screens are a strong hint that your tv isn't picking up an image. Check to see if you have a firm connection on both your tv and your input device (cable box/ dvd player). You may want to disconnect and reconnect fully. Also attempt selecting other inputs. If you only have trouble with that one input, then you have a loose internal connection. Also make sure that your TV can display an image by trying to use the on screen controls.

Sep 05, 2010 | Sony KP-53V75 53" Rear Projection...

1 Answer

How do you fix a 52" hdtv ready when its in 3D blurry format

This tv doesn't have 3D capabilities - the image appears blurry because both images are displayed on the same screen at the same time. Just don't use the 3D option from the BluRay player, view the movie normally - 2D.

Jun 13, 2010 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

My Zenith Projection HD TV is displaying a series red lines

It probably needs the convergence circuit repaired by a qualified technician.

Sep 09, 2009 | Zenith R57W46 57" Rear Projection...

1 Answer

Zenith R56W36 Image in 3D

This needs a special remote to get to the factory alignment screen.This is the part # for the remote ---#105-201m .
You really should call a good TV Tech on this one. They are a convergence nightmare for even a good Tech.

Jul 31, 2009 | Sony KP-57WS500 57" Rear Projection...

1 Answer

3d effects

it will cost between $300-$700 to fix the convergence a new board was needed.... dumped the Zenith got a RCA LCD 40inch

Jun 22, 2009 | Zenith R57W46 57" Rear Projection...

1 Answer

I have the Zenith R56W36 56 in. Rear Projection Television, and im getting a 3d affect is there a way to solve this problem? I have the zenith IQC60H95W 60" rear projection tv and have the same problem...

Projection TV sets are known to have two common problems. The first problem that is common to these sets is convergence failure. When this happens the TV will usually look 3D, Wavy/Distorted, etc. It may also shutdown and blink an error code.

The second common problem with Projection TV sets is dull video, halos around objects, white looking video, or red overpowers the screen. This is commonly caused by the fluid in the lens being clouded overs.

You can find more details and solutions here on Fixya at the following link below. Or click HERE


Jan 25, 2009 | Zenith IQC60H95W 60" Rear Projection...

1 Answer

Convergenc problem 3D

it would probably be cheaper to buy another tv

Aug 27, 2008 | Zenith A50M84W 50" Rear Projection...

Not finding what you are looking for?
Zenith R49W36 49" Rear Projection HDTV Logo

Related Topics:

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers


Level 3 Expert

56836 Answers

Are you a Zenith Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides