Question about Computers & Internet

1 Answer

Copier problem I have recently installed a toner cartridge into our Toshiba e studio 150 copier. I used a "Toshiba compatible" cartridge. The cartridge seems to fit, but now the copies are blank down the middle. Any suggestions would be very much appreciated.

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 103 Answers


Hope this will give you hints. Original is always better:) Place back any original toner cartridge(s). We'll see the result if there are different outputs. Now, access the copiers maintenance menu and have it print to check all the counters especially life of the drum's unit. Have a nice day.

Best regards,

Posted on Feb 14, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Black Toner Cartridge Not Recognized.?

Check the contacts on the toner cartridge and in the printer are clean and shiny. They also must have no dent.
We on Fixya only try to answer questions via this page. We don't send mail.

Mar 13, 2015 | Toshiba E-Studio 356 Multifunction Copier

1 Answer

Check the color toner cartridge error message appears. I have changed all the color cartridges. Still same problem. Toshiba e- studio 281c

If changed new toner still showing replace toner cartridge, then probably the toner not able to go inside developer or the developer material is worn out.

Mar 12, 2015 | Toshiba E-studio 281c Copier

1 Answer

Detect installed toner cartridge

Toner cartridge is detected by the toner sensor contacts inside the copier. It is directly in contact with the toner chip when you slide inside a new toner. This sensor has spring contacts touching the toner sensor chip of the toner..

Nov 03, 2014 | Toshiba E-Studio 255 Digital Copier...

1 Answer

Toshiba 353

you have to tell the copier you've changed the toner, OR you didnt pull the tab on the cartridge a small white waxy paper tab with an arrow on it hope Ive helped Tosh Tech 23 yrs SC

Aug 26, 2014 | Toshiba e-Studio 350 Copier

1 Answer

Toshiba E-Studio 232 PhotoCopy Too Light, Why?

one simple way that may help you out , take out toner cartridge shake it to equalize toner powder , try it may work

Jul 25, 2014 | Toshiba E-Studio 232 Copier, 232 Digital...

1 Answer

Copier wants me to install new black toner cartridge after I installed new one.

for e-studio 350 check if the developer tank unit auger broken or harden with moistered toner hope will lead u to the solution

Mar 03, 2014 | Toshiba e-Studio 350 Copier

1 Answer

Toshiba E-Studio 202L cartridge does not match manufacture

Did you replace the waste (used) toner cartridge or the empty toner cartridge? These copiers have 2 "cartridges" .... one is waste (used) toner, the other is "new" toner for copying / printing etc. Some newer copiers have All in One units....Drum, New Toner, Waste (used) Toner. If you replaced the Waste Toner container (or dumped it) that should reset the code or error message.

Jun 23, 2009 | Toshiba e-Studio 202L Copier

1 Answer

Toshiba e studio 150 problem

1-The unit that the toner goes in is probably not filling up with the toner or the unit has a problem. open copier take out drum unit and look at the unit where the toner goes into, there is a black roller with toner on it, is there a spot that seems to be missing toner? If yes it will require a tech too complicated to do for a non- tech.
2- If not, look at the black roller on the bottom of the drum unit is there toner there? clean and try.

Nov 19, 2007 | Toshiba e-Studio150 Copier

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides