Question about Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

1 Answer

How do you install the upholstery attachment to the steam vac?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 97 Answers

The recovery tank ( on bottom ) there should be a square piece that you can pull out. take off the lid and take that piece out. then put the hose part there, it doesn't have to go all the way down, just enough to be flush with the bucket. put the lid on and start cleaning. Note : you will have to take the hose off in order to do your carpets

Posted on Jul 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ATTACH UPHOLSTERY ATTACHMENT


What is the Model Number of the Steam Vac?
It should be something like F58XX-XXX

Sep 29, 2009 | Vacuums

1 Answer

How to attach the upholstry cleaners


Easliy download the manual at Hoover.com.
The hose attached in the front of the unit on the clear front panel. Lift up the center cap and attached the hose. Then attache the supply hose to the side of steam vac for your solution.

May 25, 2009 | Hoover F7425-900 SteamVac V2 Widepath...

1 Answer

Attach upholstery hose


Go to www.Hoover.com. Click on Carpet Cleaners. Click on Steam Vac All Terrain. Click on Learn more. Then click on Download the manual in pdf. The manual explains all.

Jan 22, 2009 | Hoover SteamVac F5914-900 SpinScrub...

3 Answers

Hoover Steam Vac leaks like a sieve


I have the same problem with my hoover steam vac, different model but same problem. So I have had it for 2 years and never used the attachments because the thing leaked out the bottom when i tried. So today I tried to find a solution online and found nothing. So I started toying with the thing and found a solution for my model and I hope it will work for everyone else. I don't have a stair attachment so this goes for the upholstery cleaning attachment. I noticed right where my upholstery attachment connects to get soap, there is a second hole that is covered by a white rubber seal when the cover for the connection area is closed. I put a plastic bag, or anything to seal it, into this hole to make a tight seal. Tried the machine and worked like a champ. So Would be nice if hoover supplied a plug for that, but oh well worked for me hope it works for others with a hoover steam vac.

Jan 04, 2009 | Hoover SteamVac F5914-900 SpinScrub...

1 Answer

Hoover Steam Vac


how do i get a manual on how to operate my hoover steam vac dual v spin scrub heated cleaning machine. i bought it used at a flea market and they did not have the manual. can you help me.
Thank you nessa

Oct 11, 2008 | Hoover F7220900 SteamVac V2 Upright Vacuum

1 Answer

Hoover Steam Vac Clean Surge


http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=618767&thid=407245
Hoover Steam Vac Clean Surge
Posted by just a brat on Feb 22, 2008
I can not seem to get the attachment for the upholstery cleaner to operate what am i doing wrong????

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
The attachment works on the suction from the Hoover Steam Vac and it’s either a straight suction tool or a revolving brush, check the front of the machine to see if the is a switch to turn on and odd, also before you attach the upholstery tool check the end of the hose for suction, it may be that your upholstery tool may be clogged or the brushes are not spinning and a part may be broken. Feel free to check with you local vac dealer or a new or a good used part if you find out what is wrong. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST

Don – The Vac Man
Go Ahead. Use Us.

Feb 22, 2008 | Hoover SteamVac Carpet/Upholstery Deep...

1 Answer

Upholstery conversion


Take out the duct in front of the tank (#3), the hose end will have a duct on it that you insert in its place. This provides the suction for the hose. Don't forget to put that duct you took out back in place, or you won't have suction when you use the steam cleaner.

85a23ca.jpg

Nov 21, 2007 | Hoover F5888-900 SteamVac Upright Wet/Dry...

Not finding what you are looking for?
Hoover SteamVac F5914-900 SpinScrub Upright Vacuum Logo

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Brad Brown

Level 3 Expert

15478 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...