Question about Samsung 24 in. DB5710DT Stainless Steel Built-in Dishwasher

3 Answers

I have the same SE error message on my Samsung dishwasher.

I unplugged it for 20 minutes and tried it and it made it for about 15 min then the SE error came back. Any other suggestions? Thank you.

Posted by on


3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I got SE error on my Samsung. I need help how to solve this problem? Please help!

Posted on Aug 17, 2009

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 9 Answers

Read my tip. it can be caused by gunk on the sensor in the bottom

Posted on Jan 21, 2015

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

An "SE error" indicates a drain problem. The first time I saw this error on my DMR78AHS, I experimented with different scenarios and cycles involving my washer for about a week... to no avail. Finally I pulled it out and found that the contractor who installed it had accidentally crushed the attached drain hose against a 2x4 inside the counter when they pushed it back under the counter. I had to cut off the crushed part of the hose and reconnect it the drain line with some hose clamps (this is not ideal). If it was recently installed, you could explore this option or you could simply try to snake the line, starting from where the drain hose attaches to your sink's drain. You may also want to get a professional to help such as a plumber or a dishwasher specialist.

Posted on Apr 04, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have an SE error message. Past warranty.

See if thhe error message is listed in the trouble shooting section of the owners manual.

May 15, 2016 | Samsung DW80F800UWS 24" Stainless Steel...

1 Answer

Samsung microwave error messages

This is a sign the keypad has a shorted membrane.

Mar 16, 2012 | Samsung Microwave Ovens

2 Answers

SE error code on Samsung dishwasher - ...any suggestions?


This means that the Dishwashers has detected a condition it needs to check. Press "Cancel" to clear the display and to stop the beeping sound, then try turning the Dishwashers off and on again.

If you still see the "
SE error code," turn off the power to your Dishwashers and wait five minutes before turning it on again. If you hear the beep or see the "SE error code" when you try to washing again, please call your authorized provider for service.

Hope this help?.

thanks for visit.

Dec 15, 2010 | Samsung 24 in. DB3710D Dishwasher

3 Answers

I am recieving an SE code on my samsung dishwasher. I tried to reset the dishwasher by switching off the power to the machine for 20 minutes. still SE message

I'm getting the same message too. I turned it off for awhile and I had a technician come out and take a look. My drainage pipes are all clear (SE code can mean that drainage is not working properly). He suggested that I get a "Samsung" tech out to take a look at the circuit board/electrical issue. Want to know the crazy thing? This is my second dishwasher that Samsung replaced....all the same electrical issue.....and just last week someone called me to see if I wanted to buy an extended warranty on it. they know that this a piece of junk? It was an expensive dishwasher too.....doesnt clean any better than my cheap model did and it sure has a lot more problems in this first year than the whole 5 years that I had my other dishwasher. Can you tell im disgruntled?
I would love to hear if there is a simple fix to this SE problem.

Sep 25, 2010 | Samsung 24 in. DB5710DT Stainless Steel...

1 Answer

Error message LE

1. drain water
2. unplug for 20 minutes
3. spin the drum manually 3 rotations
4. back in business

look at this link below it has "Other" info

Mar 06, 2010 | LG 24 in. LDS 5811 Built-in Dishwasher

1 Answer

Entire microwave is dead except LED screen which has a message -- E 5 -- Spoke to Samsung who told me to unplug it for 10 minutes - that dosn't do anything. This is a top of the line over the stove...

From the Samsung FAQ:

For all error indications, including the SE or 5E error, try unplugging the microwave from the outlet for at least ten minutes and then plug it back in. If the error persists, the microwave may require service. Please use our ASC Locater (sic) to find your nearest Authorzied Service Center.

It may be a failed sensor.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Sep 11, 2008 | Samsung Microwave Ovens

3 Answers

Error message on startup

The fuser unit could be the causes. But you can try this, power off the printer & unplug the power cord for 15 to 20 minutes. Power on after 20 minutes and se whether the problem resolves, if it ok, monitor it for a while just to make sure the problem resolves

Nov 20, 2006 | HP LaserJet 4 plus Printer

Not finding what you are looking for?
Samsung 24 in. DB5710DT Stainless Steel Built-in Dishwasher Logo

1,695 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Dishwashers Experts


Level 3 Expert

1216 Answers


Level 3 Expert

2992 Answers

Cindy Wells

Level 3 Expert

5471 Answers

Are you a Samsung Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides