Samsung SCX-3405F printer.Stuck on system initializing.Unable to push any buttons.Tried unplug and reconnecting-buttons blink for a split second and then stuck again. Also removed toner and put back.

Printers dont reset unless you unplug them from the power connection or mains. Try again.

I suspect a loose or damaged paper roller. It might need reseating. Make sure that all the rollers are intact and close all printer doors firmly

Corrupted firmware; Linda. A firmware update is necessary. Contact any service technician, or the authorized service center.
http://electronicshelponline.blogspot.com/

make sure you dial the area code to.also make sure you telephone line woks.plug the line into a regular phone in to make sure you have dial tone

plese replace the your printer laser scaner unit

hello . i have a samsung scx-3405f and i have been refil the cartrige ... after i refiled my multifunction machine say on the display "Not Compatible toner cartrige". i donn`t know what to do to him because i have buy a new cartrige and she tell me the same thing. please answer to [email protected] ... tks verry mutch

Is There Anybody to solve my problem? My Problem Is "Reseting Samsung SCX-3405f Multifunction Printer".

simple buddy. just go to samsung website. select your printer in search section and you have your drivers along with mannuals. If you find it difficult then mail me with your samsung model number and i'll send you the link.

Dear
Try to re assembly all harness terminated at main board, Test the machine on toner cart and drum cart opened. System not initialized, check the main board.

Thanks.

simply unplug the power and turn it on again