Question about NetGear ProSafe FVG318 (606449041668) Firewall

4 Answers

How do i unblock netgear firewall?

Am using an ACER netbook, have tried with the username as : admin and password as :12341234 or password but it doesn't accept the password!


Posted by on


4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert that has over 500 points.

  • Expert
  • 322 Answers

Sir to access the router, go to your browser then type in then type in Under the Username field enter “admin” and Under the password field enter “password”. After this you are now in it and you can now configure the firewall to be in unblock mode. Before doing this sir, i suggest that you unplug any cable in the WAN slot and just leave the PC you are using to it.

Posted on Jul 19, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,559 Answers

  1. Open an Internet explorer and type the router IP address which would be either or (The default IP address.) in the address bar and press Enter.
    The Login window will be prompting for a Username and Password. The default Username is admin and the default Password is password
You can also use no username and Admin as the password

Posted on Jul 19, 2009

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 38 Answers

Just suicide

Posted on Jul 26, 2010

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Use the Reset button on the rear panel of the firewall. Use this method for cases when the administration password or IP address are not known.
Press and hold the Reset button until the Test LED turns on and begins blinking (about 10 seconds).
Release the Reset button and wait for the firewall to reboot.
This will change the firewall’s administration password to password and the IP address to
This will also restore the router to the default configuration.

Posted on Jul 19, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I set the network in my netgear N300 for my laptop?

Visit You can also use the following if the does not work: Enter the following default login credentials:
  • Username: admin
  • Password: password
Then go to Wireless and chose Name (SSID): and Passphrase :

Jul 04, 2014 | NetGear N300 Wireless Router

1 Answer

What is my default ownership password netgear N600 only numbers

See the following articles for more information:

Log in to your NETGEAR router by browsing to or Enter the username (admin)and password by default the password is 1234 unless it has already been changed
hope it helps

May 25, 2012 | NetGear N600 Wireless Dual Band Router

1 Answer

How do i enter username and password

First you need to log into router using windows explore or internet.

Connect to the wireless router by typing either of these URLs in the address field of your browser, then click Enter:
• The wireless router will prompt you to enter the user name of admin and the password. The default password is password

Also here is a link to your manual for the router.

Sep 28, 2011 | NetGear WGR614 Wireless Router

7 Answers

How do I change the log-in from the factory default. I tried to go the, as directed, but got nowhere?

Try or http://www. instead.
the default username is "admin" and the default password is "password".
To change log-in details: On the main menu, under Maintenance, select Set Password to display the Set Password screen.
Have a good one.

Mar 10, 2011 | NetGear WNR2000 Wireless Router

4 Answers

How do i access my router to change the channel

You could refer to the Manual in order to do the changes on your router Following link could help you resolve your problem.

Mar 06, 2011 | NetGear WNR2000 Wireless Router

2 Answers

Can't get my passphrase to open netgear wireless

  • log in to the netgear router's interface using
  • username- admin , password : password
  • Click on wireless settings under setup . ( 3rd option from the top )
  • Under the security options .
  • U can find ur security passphrase to connect with netgear wireless.
In case of further assistance , do revert back

May 09, 2010 | NetGear WG111V2 Wireless Adapter

1 Answer


Here's a great resource for you:

1. First RESET the router. (see attached image for how to reset)

2. Go to or (whichever one works for you)

OR or

3. The default access credentials:

Username: admin
Password: password

4. Read the document for easy step by step


Mar 16, 2010 | NetGear WGT624 Wireless Router

2 Answers

Blocked facebook via router

You can't really get round this easily.
But to by-pass the problems you can
1) reset the router to factory defaults... you will need the username and password for this for the router which are (depending on your version)
Username: admin
Password: password
Username: admin
Password: admin

Then set yourself up as primary account holder - you will also need the ISPs log in details.

Alternatively, use a web proxy server to connect to facebook. I reccomend SSLUnblock but for others you can find a nice list of proxy servers here.

If this helped you then please help me and vote kindly, thank you.

Oct 15, 2009 | NetGear WGR614 Wireless Router

1 Answer

Slow for donlwad for netgear dg 834 g

open the netgear smart wizard page( username-admin and password-password(default).In the netgear page at the left side blue screen click on wan setup under advanced menu . 1.check mark the disable spi firewall box 2.change the mtu size to 1350. 3.If these steps doesnt show any improvement then your firmware version might be older version so upgrade the new firmware in router upgrade. This will solve your issue if not it can be browser try new browser.hope i have helped you. Rate me if my solution was helpful.Have a good day

Oct 04, 2009 | NetGear DG834G Router

21 Answers

How do i unblock netgear firewall

Lets say this is blocking Facebook:

the URL would be:

and it would be blocked.

Instead, type the http part with an extra s, so that it's https://

So now it would be

Often times this will unblock. Just the only annoying thing with this is that you'll have to keep adding "s" to the end of it every time you visit a new page, but it's better than nothing.

Hope this helps!

Nov 28, 2008 | Computers & Internet

Not finding what you are looking for?
NetGear ProSafe FVG318 (606449041668) Firewall Logo

4,492 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides