Question about The Watches

2 Answers

How do i set the date on my v6 super speed v0048 watch?

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer got voted for 20 times.

  • Expert
  • 124 Answers

Most analog watches set the date by using the crown (the large knob in the center of the right side). The V6 is a low priced watch so it won't have a screw-down crown. You simply pull out the crown to set either date or time. But note that the crown will have 2 positions. The 2nd position is when the crown is fully pulled out. That sets the time. You have already done this. Well, pull out the crown again, but now push it in but very gently. You'll want to be in the 1st position. Some watches like the V6 have this very subtle. Once in the 2nd position, spin the crown and the date numbers should change. You may need to make at least one full rotation or more to trigger the date change. Keep going until you've got the right date.

Posted on Jan 06, 2018

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • The Master
  • 48,632 Answers

Try Googling (v6)(v0048)(manual) without parens for instructions.

Posted on Jan 02, 2018


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Instructions for v6 super speed v0048 watch

Try Googling (V6)(v0048)(manual) without parens.

Jun 19, 2017 | Watches

1 Answer

How do I set the date on a V6 super speed watch no.0048

Try pulling crown out, it may have 2 positions.

May 22, 2017 | The Watches

1 Answer

Set day and date

every watch is different. If you no longer have the directions (manual) then google the watch type and manual and most times you can get the manual for free

ie: manual for timex alpine climber super manly man watch

Mar 12, 2015 | Watches

1 Answer

Is there any way that I can set my Seiko perpetual calendar watch at home?

What a great watch! It has a super-fine piezo-electronic motor to move the date wheel! Very cool. Its quite a show to go through the date/leap-year check, and then observe the watch catch back up to the correct time afterwards. Battery lasts ~five years.
I downloaded the manual (your model number on watch back) after a short search online (beware of trojans/viruses).
Setting after a battery replacement requires shorting certain pins inside the watch to set the leap-year, and date. The back unscrews, and may require the special watch-wrench, available online. I unscrewed mine VERY CAREFULLY with fine pliers, confirming that I was doing this in a clean, dust-free location. The instructions are quite specific, must be followed carefully to set up correctly. Have a fine wire jumper to set the leap-year. I learned this because I did not want to pay an inexperienced jeweler $100 to replace the battery.

Oct 13, 2014 | Seiko Watches

1 Answer

I have 1 sonata super fibre watch analog+digital i dont know how to set time in it

If its a super fibre 3 series with 4 butons ( set, adj, mode, light)
Just keep the set button pressed for about 5 seconds, then use mode to select next( date, time, year etc) and adj to change the respective data. Then press Set once and its done.

Nov 18, 2012 | Watches

1 Answer

I just bought a Bulova Super Seville watch how do you set the day and date?

Pull the stem out one click, rotate stem clockwise to set day, counter clockwise to set day, pull stem out to second click to set time

Feb 22, 2011 | Bulova Men's Watch

2 Answers

How do you set the time and date for a pokemon c watch form trend setters?

you press down on the two buttons on the right as hard as you can until it shows the time settings. It took me a long time to figure it out but i was super excited once I got to set mine xD Hope that helps!

Jan 04, 2011 | Watches

1 Answer

Nixon super rover..need to know how to reset the chronograph

Pull the stem all the way your setting the date. Then hit the upper button and that will move the hand 1 second at a time until it gets here you want.

Feb 14, 2008 | Nixon Super Rover NIX0123

2 Answers

Adjusting my timex expedition cr2016

nike T20 lap digital sport watch? Older model. cannot adjust time, date, etc. Know where to get instructions?

Sep 25, 2007 | Nike Super WR0064405 Wrist Watch

Not finding what you are looking for?
Watches Logo

Related Topics:

864 people viewed this question

Ask a Question

Usually answered in minutes!

Top The Watches Experts


Level 3 Expert

1216 Answers

D. E. Hev

Level 3 Expert

1187 Answers


Level 2 Expert

121 Answers

Are you a The Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides