Hello, i sell the pws laptops, this is the complete list of all the printers that it have installe:
EDOC BROWSER (OMNI BROWSER)
-1010 DIAGNOSCTICS
-1065 NVM TOOL
-1090 NVM TOOL
-2101 DIAGNOSTIC
-4110 PWS DIAGNOSTIC TOOL
-4112/4127 SW TOOL
-4590 PWS DIAGNOSTIC TOOL
-4594 PWS DIAGNOSTIC TOOL
-5065 NVM TOOL
-5090 NVM TOOL
-5100 NVM TOOL
-5100 ELECTRONIC SERVICE LOG
-5365 NVM TOOL
-5800 ELECTRONIC SERVICE LOG
-5800 CALL FLOW
-5800 NVM TOOL
-6100 SCP, CONFIG DB
-6135 SCP,CONFIG DB, SCP
-6180 SCP, CONFIG DB
-700CP, NVM ACCES/SW TOOL
-D135 NVM TOOL
-DC2045 EPC DIAGNOSTIC
-DC2060 EPC DIAGNOSTIC
-DC220/230 ALTERNATE BOOT, DATA MAN, ELECTRONIC SERVICE LOG
-DC2240/1632 DIAGNOSTIC
-DC332/340 ALTERNATE BOOT
-DC332/340 DATAMAN
-DC332/340 ELECTRONIC SERVICE LOG
-DC3535 DIAGNOSTIC
-DC420/440 ALTERNATE BOOT
-DC420/440 DATAMAN
-DC420/440 ELECTRONIC SERVICE LOG
-DC5000 PWS DIAGNOSTIC TOOL
-DC5252 EPC DIAGNOSTIC
-DC6060 EPC DIAGNOSTIC
-DCS20 SOFTWARE UPLOAD
-DCS20 TTY
-DCS35 2 X 40, SOFTWARE UPLOAD, TTY
-DCS40-65 ALTERNATE BOOT, DIAGNOSTIC, ELECTRONIC DOCUMENTATION, ELECTRONIC SERVICE LOG
-DOCU NVM TOOL
-DOCU12 DIAGNOSTIC
-DOCUCOLOR 242/252/260 SW DOWNLOAD TOOL
-DOCUCOLOR 250 PWS DIAGNOSTIC TOOL
-DT135 NVM TOOL
-DT65 DP65 SCP,CONFIG DB, DIAGNOSTIC, DOCUMENTATION, ELECTRONIC SERVICE LOG
-WORKCENTRE 7132 SW DOWNLOAD TOOL
-WC 7232/7242 SW DOWNLOAD TOOL
-WC 7346 SW DOWNLOAD TOOL
-WC 7328/7335/7345 SW DOWNLOAD TOOL
-WC M24 DIAGNOSTIC
-WCPP DIAGNOSTIC
-XC550_560 NVM ACCES/SW DOWNLOAD TOOL
-PRODUCT UPDATE LINKS:
-EFILE DOWNLOAD INSTRUCTIONS
-MY PRODUCT UPDATE LINKS
-BUSINESS READY FINISHER
-COLOR C60,C70 PRINTER FAMILY
-ENGINEERING SYSTEMS,721P,6622,8855
-ESPRESSO BOOK MACHINE
-MISCELLANEOUS
-VERSANT 2100 PRESS FAMILY
-WIDE FORMAT IJP 2000
-WORKCENTRE 5890 FAMILY
-WORKCENTRE 5945,5955 FAMILY
-WORKCENTRE 7220,7225 FAMILY
- WORKCENTRE 78XX
my whatsapp is +52 1 664 133 7404
I accept paypal.
SOURCE: Xerox Phaser 8550DP fault code
Flat Rate - Complete On-Site Repair Service of your broken Tektronix / Xerox Phaser Printer
iTezen is Now offering Complete On-Site Repair Service of your broken Tektronix / Xerox Phaser Printer at a flat rate. Basically we repair any problem you may be having with your Phaser Printer for a flat rate. The flat rate covers cost of parts, labor and travel expenses. The flat rate is all you will pay to get your printer back in order. No hidden fees or charges. We show up! We Repair it. You pay us the rate for you model.
Our Flat Rates:
MODEL: Tektronix Phaser 840 Color Printer Repair - $159
MODEL: Tektronix Phaser 850 Color Printer Repair - $159
MODEL: Xerox Phaser 860 Color Printer Repair - $159
MODEL: Xerox Phaser 8200 Color Printer Repair - $159
MODEL: Xerox Phaser 8400 Color Printer Repair - $179
MODEL: Xerox Phaser 8500 Color Printer Repair - $199
MODEL: Xerox Phaser 7700 Color Printer Repair - $209
MODEL: Xerox Phaser 7750 Color Printer Repair - $249
MODEL: Tektronix Phaser 780 Color Printer Repair - $179
MODEL: Xerox Phaser 790 Color Printer Repair - $179
To further guaranty the quality of our services we accept COD payment (Cash On Delivery of service).Our technician will arrive at your location and repair your printer, get you printing again, then collect the payment.
We have technicians in:
Alabama, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South, Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, and Wyoming.
Itezen, Inc.
Tel. 516.776.7346
http://www.itezen.com/
Email: [email protected]
SOURCE: I have a Xerox 7655 printer and I am trying to use
You may need to change the driver. I have seen different issues with machins printing tabs, that changing the print driver will solve. Most of the tab issues are when the driver is a PCL 5 or PCL 6 driver. Switching to a PS driver frequently helps resolve those issues.
The newest drivers would be located on Xerox.com. Go to the home page, select Drivers and downloads, then enter your model number in the search box, and then select downloads and drivers again and select the newest PS driver and install that. I am pretty sure a new fresh PS driver will resolve your problem.
I am including the setup procedure below, I assume this it the process you followed.
Try a new driver. If that doesn't resolve it, possibly the machine firmware itself will need to be updated to the newest version.
The template is set up to provide centered text in the available tab printing area at each position.
At each printing position click to highlight all the text visible on the sheet. Type in the wording you desire and proceed to the next sheet.
When printing the file ignore the warning about margins.
At The Printer:
1) Load the tabs long edge feed with the smooth edge feeding into the machine. The first tab will be on top towards the front of the printer.
2) Set the paper type to [Pre-cut tabs (106-176gsm).
3) Set the number in sequence using the [up/down] arrows for the number of tabs in the set.
4) Set the paper size to [9x11].
5) Select [Confirm].
At The Workstation:
1) Select [File], [Print] and select your printer from the [Printer Name] drop down.
2) Select the [Pages] radio button and set the page range to 2-6.
3) Select the [Paper/Output] tab.
4) Select the [Select Paper] button.
5) Select [Pre-cut tabs] from the [Type] drop down.
6) Set the number in sequence using the [up/down] arrows for the number of tabs in the set.
7) Select the [Layout/Watermark] tab.
8) Select [Fit to New Paper size] and select [9x11] from the drop down.
9) Select [Rotated Landscape] from the [Image orientation] drop down.
10) Select [Ok] twice to print the job.
SOURCE: xerox docucolor 1632 fault code: 004-341
Try reseating the waste toner then all 4 drums, see if the chips are mating.
Most likely either the machine software is corrupted and needs to be reloaded, or the MCU board has failed, could also be a bad laser, called the ROS.
SOURCE: Xerox system error 09,035,43:46300.
This is from the service manual
Harry
9,035.43 through 9,038 (8500/8550/8560 only): Ink count sensor flags are
stuck after melting 2.5 ink sticks. The following codes are recorded: 9,03x.41,
where x= 5 for cyan, 6 for magenta, 7 for yellow, and 8 for black.
Features on the bottom of genuine Xerox ink sticks actuate the Ink Out
Sensor located at the forward end of each ink channel of the Ink Loader. The
sensor indicates the passage of ink to provide a count of ink consumption.
Damaged or non-genuine ink sticks may not reliably actuate the sensors. This
can lead to false Ink Out messages as well as Ink Stick count faults. Using
8400 model ink in a 8500/8550/8560 models will also cause 9,03x.4x ink stick
count faults.
Troubleshooting Procedure for Ink Loader
Step Questions and Actions Yes No
1 Is the ink Genuine Xerox? Are they the
correct sticks for the model?
Go to Step 2. 1. Advise customer.
2. Replace the Ink
with Xerox Ink.
3. Run Clear ISC
Fault test to clear
the error. The
Clear ISC Fault is
located in the
Internal
Diagnostics
Function menu.
2 Manually verify that the ink stick is able
to advance in the ink loader chute.
Check for broken or wrong type ink
sticks.
Go to Step 3. 1. Remove any
blockage and/or
replace the ink
stick.
2. Replace the Ink
Loader.
3. Run Clear ISC
Fault test to clear
the error
We have a WorkCentre 7655 that has been working fine for ages but is now causing some issues. A user who is running Windows 7 32 bit edition is sending files to print (using the secure print function) - the system is reporting they have spooled fine to the printer - but when they go and release the document they are getting (more often than not) about 16 out of 21 pages (for example) and then a PCL XL Error (Subsystem: Text, InternalError 0x50, Operator: Text, Position: 8564). I have another document that 9 times out of ten will actually crash the WorkCentre completely and cause it to reboot mid way through printing.
The driver we are using is the latest: "Xerox WorkCentre 7655 rev 2.0 PCL6"
As mentioned the user is running Windows 7 - the printer is shared from a Windows 2003 Server which has the same version of the driver.
818 views
Usually answered in minutes!
Hello, i sell the pws laptops, this is the complete list of all the printers that it have installe:
EDOC BROWSER (OMNI BROWSER)
-1010 DIAGNOSCTICS
-1065 NVM TOOL
-1090 NVM TOOL
-2101 DIAGNOSTIC
-4110 PWS DIAGNOSTIC TOOL
-4112/4127 SW TOOL
-4590 PWS DIAGNOSTIC TOOL
-4594 PWS DIAGNOSTIC TOOL
-5065 NVM TOOL
-5090 NVM TOOL
-5100 NVM TOOL
-5100 ELECTRONIC SERVICE LOG
-5365 NVM TOOL
-5800 ELECTRONIC SERVICE LOG
-5800 CALL FLOW
-5800 NVM TOOL
-6100 SCP, CONFIG DB
-6135 SCP,CONFIG DB, SCP
-6180 SCP, CONFIG DB
-700CP, NVM ACCES/SW TOOL
-D135 NVM TOOL
-DC2045 EPC DIAGNOSTIC
-DC2060 EPC DIAGNOSTIC
-DC220/230 ALTERNATE BOOT, DATA MAN, ELECTRONIC SERVICE LOG
-DC2240/1632 DIAGNOSTIC
-DC332/340 ALTERNATE BOOT
-DC332/340 DATAMAN
-DC332/340 ELECTRONIC SERVICE LOG
-DC3535 DIAGNOSTIC
-DC420/440 ALTERNATE BOOT
-DC420/440 DATAMAN
-DC420/440 ELECTRONIC SERVICE LOG
-DC5000 PWS DIAGNOSTIC TOOL
-DC5252 EPC DIAGNOSTIC
-DC6060 EPC DIAGNOSTIC
-DCS20 SOFTWARE UPLOAD
-DCS20 TTY
-DCS35 2 X 40, SOFTWARE UPLOAD, TTY
-DCS40-65 ALTERNATE BOOT, DIAGNOSTIC, ELECTRONIC DOCUMENTATION, ELECTRONIC SERVICE LOG
-DOCU NVM TOOL
-DOCU12 DIAGNOSTIC
-DOCUCOLOR 242/252/260 SW DOWNLOAD TOOL
-DOCUCOLOR 250 PWS DIAGNOSTIC TOOL
-DT135 NVM TOOL
-DT65 DP65 SCP,CONFIG DB, DIAGNOSTIC, DOCUMENTATION, ELECTRONIC SERVICE LOG
-WORKCENTRE 7132 SW DOWNLOAD TOOL
-WC 7232/7242 SW DOWNLOAD TOOL
-WC 7346 SW DOWNLOAD TOOL
-WC 7328/7335/7345 SW DOWNLOAD TOOL
-WC M24 DIAGNOSTIC
-WCPP DIAGNOSTIC
-XC550_560 NVM ACCES/SW DOWNLOAD TOOL
-PRODUCT UPDATE LINKS:
-EFILE DOWNLOAD INSTRUCTIONS
-MY PRODUCT UPDATE LINKS
-BUSINESS READY FINISHER
-COLOR C60,C70 PRINTER FAMILY
-ENGINEERING SYSTEMS,721P,6622,8855
-ESPRESSO BOOK MACHINE
-MISCELLANEOUS
-VERSANT 2100 PRESS FAMILY
-WIDE FORMAT IJP 2000
-WORKCENTRE 5890 FAMILY
-WORKCENTRE 5945,5955 FAMILY
-WORKCENTRE 7220,7225 FAMILY
- WORKCENTRE 78XX
my whatsapp is +52 1 664 133 7404
I accept paypal....
how much for the system email me at [email protected]
×