How to put iPad 1 in dfu mode - Cell Phones

Put phone in DFU and do a restore

Under this circumstance you may have to reset the iPad if you forget both Apple ID and its password.

To reset iPad without Apple ID, you need first put iPad into DFU mode and connect it to your iTunes. Your iTunes will help you to reset your iPad without entering Apple ID easily. Resetting your iPad with this method will result in wiping all the data in your tablet. The following steps will show you how to do that.

Step 1: Open iTunes on your computer and connect your iPad to the computer with a USB cable.
Step 2: After that, turn off you device. Press and hold the Home button for 3 seconds.
Step 3: Put your iPad into DFU mode: Press and hold the Power and Home button for 10 seconds. Then release the power button and keep holding the home button. When you see the Apple logo disappears, you have successfully put your iPad into DFU mode.
Step 4: When iTunes detects that your iPad is in recovery mode, you can restore it now.
Step 5: Click on Restore iPad. Then you will be notified after the reset and your iPad will take a restart.

After resetting your iPad with the guidance mentioned above, you'd better create a new Apple ID and password in time. After resetting iPad, you will get all the data swept from iPad, and you can restore the files from your iPad, iTunes backup or iCloud backup. However, you can't backup iPad to iTunes/iCloud without Apple ID before you reset your iPad . In this case, you need the third-party iOS data recovery software to help you recover lost data from iPad after factory reset without Apple ID.

http://www.leawo.org/tutorial/how-to-reset-iphone-without-apple-id.html

Put the iPad into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
If that still doesn't work, as a last resort try DFU mode:
http://osxdaily.com/2010/12/04/ipad-dfu-mode/

http://www.imore.com/tip-put-iphone-ipad-dfu-mode How to put your iPhone or iPad into DFU mode

If you cannot remember the pass code you will need to restore iPad through iTunes. You must put the iPad in dfu mode to restore, there are several videos on YouTube on how to put your device in dfu mode. After it is I dfu mode, simply plug device into iTunes. iTunes will detect that the device is in recovery mode and give you the option to restore..

If you cannot remember the pass code you will need to restore iPad through iTunes. You must put the iPad in dfu mode to restore, there are several videos on YouTube on how to put your device in dfu mode. After it is I dfu mode, simply plug device into iTunes. iTunes will detect that the device is in recovery mode and give you the option to restore..

If you cannot remember the pass code you will need to restore iPad through iTunes. You must put the iPad in dfu mode to restore, there are several videos on YouTube on how to put your device in dfu mode. After it is I dfu mode, simply plug device into iTunes. iTunes will detect that the device is in recovery mode and give you the option to restore..

If you cannot remember the pass code you will need to restore iPad through iTunes. You must put the iPad in dfu mode to restore, there are several videos on YouTube on how to put your device in dfu mode. After it is I dfu mode, simply plug device into iTunes. iTunes will detect that the device is in recovery mode and give you the option to restore..

Perform a factory reset from "dfu" mode. Turn iPad off and enter dfu mode. Then plug onto PC and restore with iTunes. Here are some instructions for any iPhone /iPad


Enter iPad DFU Mode

Here's what you'll need to do:

• Plug the iPad into your computer
• Launch iTunes
• Hold down the Power button and the Home button at the same time
• Keep holding both of these buttons for 10 seconds
• After 10 seconds pass, release the Power button but continue to hold the Home button for another 3-5 seconds
• When in DFU mode, your iPad screen will stay completely black. If you see an Apple logo or otherwise you did not enter DFU mode
• iTunes will notify you that it has detected a device in recovery mode, choose restore option.

this Mode use when you want to install new ios OR upgrade/downgrade your version so that it will recognize by the software.

Hold the power button and home button for 15 seconds the both with each other.

Then release the power button but keep holding the home button for another 15 seconds.

The iPhone screen will remain black - now your on DFU MODE