Question about iiyama PROLITE E2200WS WIDESCREEN LCD 22" Monitor

1 Answer

When i turn on my computer my screen gets after 1 sec dark and stays that way i can see my windows but its dark and the problem is not the adjustment of the monitor when i'm going into sleep mode and go back again i see my desktop for 1 sec and goes back again please help me

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,684 Answers

Hello,

It sounds like you have a monitor with a common problem. After a few years some LCD monitors will blow a power supply. The problem is caused by parts called capacitors overheating in the confined space of the monitor. If you are good at electronics repair/soldering you can usually fix the problem. Check out a few pictures on my web site www.ccl-la.com/badcaps.htm You can take the back cover off your monitor and look for the bad parts,replace any that look like the pictures and your monitor should work fine. The capacitors do need to be installed with the correct + and - connections, note the stripe on the old one and insert the new one the same way. Look in our monitor repair section for step by step repair guide for this model. If you don't want to try the repair yourself we offer a repair service for $35 plus shipping.

I hope this helps, if so please rate my solution.

Buddy
Corporate Computer
www.ccl-la.com
Over 21 years of computer and printer support/repair

Posted on Jul 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Adjusting screen brightness on lenovo z500


Try this if you have Windows 8.1:
https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Z400-Adjusting-the-Brightness-in-Windows-8-1/ta-p/1303113

May 13, 2014 | Lenovo IdeaPad Z500 Laptop Computer -...

1 Answer

Monitor comes on but the screen gets dark after a 3 sec


if the power indicator at the front panel stay lit but no screen display or black screen, it could be a sign of bad power inverter board or screen back light. now to ensure if it was the cause you can do a voltage checking, at this time you will need a digital tester. you need to know if their is a bl_on voltage at the power inverter board around 3-4.4v to turn on the inverter board that supply the back light.if the power inverter board has 12v dc and has bL_ON voltage then the cause will be a bad inverter board. you must check also for a dry joint connector going to back light.

Nov 15, 2012 | ViewSonic VG2030wm LCD Monitor

1 Answer

I have a Sceptre X7G-Naga VI 17 inch LCD Monitor When I turn the monitor on and boot the computer I get the red light for a sec then the blue light comes on I will also see windows booting up but the...


try with restarting computer & press F8 at the same time. u will see a menu where choose "safe mode" & start the computer. in safe mode see the display properties, set the refresh rate & resolution according to monitors specifications, apply & restart again. if that does not work, replace the main board of lcd monitor.

Aug 25, 2011 | Sceptre 17" LCD Monitor

1 Answer

I have a Sceptre X7G-Naga VI 17 inch LCD Monitor When I turn the monitor on and boot the computer I get the red light for a sec then the blue light comes on I will also see windows booting up but the...


try with restarting computer & press F8 at the same time. u will see a menu where choose "safe mode" & start the computer. in safe mode see the display properties, set the refresh rate & resolution according to monitors specifications, apply & restart again. if that does not work, replace the main board of lcd monitor.

Aug 25, 2011 | Sceptre X20G-Naga II 20.1" Flat Panel LCD...

1 Answer

Turn monitor on picture stays on for about 30 sec to 1min then goes off.


If it is just the screen going dark then your backlight controller is faulty and needs repair.

Mar 02, 2011 | Dell Computers & Internet

1 Answer

Dark screen on my headrest tv


its defective, need to be repaired or replaced

May 29, 2009 | Car Audio & Video

1 Answer

Dark screen, nothing comes out.


Make sure all connections are tight and secure. Troubleshoot like this.

Can you see the boot screen when it boots up( Before the Windows logo appears.)

1. Check and tighten all connections,

2. Possible monitor went out.

Mar 13, 2009 | HP (D7580-60003) Motherboard

1 Answer

Power light steady green but monitor goes dark after 4 secs of video


The video card in the computer could be going bad too or the driver for the video has corrupted. Try reloading the video drivers in the PC first.

Mar 29, 2017 | NEC MultiSync LCD1770V - Flat panel...

Not finding what you are looking for?
iiyama PROLITE E2200WS WIDESCREEN LCD  22" Monitor Logo

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top iiyama Computers & Internet Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Ed Mac

Level 3 Expert

731 Answers

steve morris
steve morris

Level 3 Expert

1675 Answers

Are you an iiyama Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...