Bobbin thread will not come up on my Bernina 150 QE

Buy game cdkeys on m8x.com, enjoy your game now

hi susan.
see if this link helps you out.
can get my Bernina Virtuosa 150 to bring up bobbin thread Google Search

Check to see if your machine is set to load bobbins. Also, check to make sure that your feed dogs are set to the upper (on) position.

Try enterng this in the google search block; "bernina 440 qe maintenance" it comes up with a lot of informaton and even videos.

Check the tension for upper thread and bobbin(tiny screw to turn anticlockwise to give less tension)

Its possible, refer to your machine manual to adjust the tension. You might need to change your needle to fit the thread you are using.

Check that the thread is tight around the bobbin. Make sure that the bobbin is in the right way around - the bobbin thread should double back on itself coming out of the bobbin holder. The bobbin tension adjustment is the small screw in the plate on the bobbin case that the thread passes under as it comes off the bobbin and goes out.

The previous answer is incorrect. The bobbin should turn clockwise in the bobbin case, but then the thread doubles back through the bobbin case tension slot so the end of the thread would be pulling counter clockwise. Are you using genuine Bernina bobbins? Sometimes, generic bobbins do not work as well.

Are you applying a drop of oil to the shuttle/hook area every 8 hours of sewing time? Lack of oil makes my machine noisier. When I notice the sound has changed, I know it's time it needs some TLC.

If you are still having problems with the Bernina technician, try to find another dealer.

The hook is in the bobbin area and is what takes the thread from the needle to make the stitch. A standard 15x1 needle or 705 needle is the correct needle for your machine. They are available at ant sewing center.