Question about Zanussi F1045W Front Load Washer

Open Question

My zanussi washing machine does not go thriugh the

My zanussi washing machine does not go through the wash cycle correctly does this mean my timer is not working

Posted by on

  • lindaaspiers Jul 23, 2009

    hi my washer will wash but then not drain so then i have to move the dial to the drain cycle then the water will drain away then i put it round to the rinse cycle it will rinse but not take the softener so then i have to add the softener while the water is going through the drawer then it wont drain so then i have to move it to the drain cycle again then i have to put the dial to the spin sometimes it goes through cycles ok sometimes i have to do it all manually

  • silver top May 11, 2010

    hi from uk could you please verify ? does the wash cycle run ok untill the last rinse then on final spin cycle it does not spin clthes dry ? as though not fast enough ? or is problem some other reason more info would help to diagnose fault and probably save you$$$s even diy if you wish

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 183 Answers

SOURCE: zanussi washing machine

E90 is not a listed error code however most 90 range codes relate to a faulty pcb, some times worn motor brushes and blocked filter and air traps can cause some innacurate error codes being displayed we would normally check these items prior to replacing the PCB Regards Advisor

Posted on Sep 01, 2007

Ad

SOURCE: ZANUSSI WASHING MACHINE

seems to be a problem with the filter. was with mine.. one thing i always forget to clean it regularly.
Be careful when open the little hatch thingie , there will be water coming out . so prepare with a bakingtray and kitchen towels. and open it SLOWLY!!! so the water doesnt totally soak the floor.
then clean clogged up filter. at least that solved the problem in my case, hope it works

Posted on Dec 29, 2007

  • 1314 Answers

SOURCE: roper washing machine roper rax7245kqo

more than likely something is jamming your pump now your coming up on the post with another user as having the same problem but its not the same kind of machine im getting ready to answer the first user who has a front loader and it may pop up to you so disregard that. Reply to this message and ill tell you how to check yours

Posted on Jan 01, 2008

  • 2 Answers

SOURCE: Zanussi ZWF16581W Washing Machine

I believe there is a setting where you can turn the beeping alarm off completely. Read the manual and you should find it.

Posted on Mar 04, 2008

bozcro
  • 867 Answers

SOURCE: Zanussi ZWD1470W fabric conditioner compartment won't drain

fabric conditioner is dispensed during rinse cycle, if it does not work then either, try pouring hot water into dispenser, as conditioner tends to get goopie when dry, thus may have clogged up

Posted on Dec 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zanussi FJ1214 Washing Machine won't agitate but spins


Sounds like gearbox or check if a belt has came off or slipping underneath.

Nov 01, 2014 | Zanussi Washing Machines

1 Answer

Zanussi zwf1421


Thermostat or heater most likely causes. Does timer button move round without doing anything? Timer knobs on Zanussi notorious for breaking off inside.

Apr 28, 2012 | Zanussi F1245W Front Load Washer

1 Answer

My Zanussi washing machine just stops mid-cycle . After a few minutes the timer then goes back to the start time . What is wrong


there may be an earth fault when the machine is hot . motor or heater needs to be tested withinsulation tester.

Jul 20, 2010 | Zanussi Washing Machines

1 Answer

Zanussi washing machine is making five beeps and not workign - what does this mean? It is not in the manual


My Zanussi Fs1555w is not finishing it's cycle and beeping 7 times. If I put on spin the cycle lasts less than a minute before the end button beeps, then it will beep repetitively 7 times until turned off. Please help

Feb 05, 2010 | Zanussi FS1455W Front Load Washer

1 Answer

Zanussi washer machine zwf1621s does a washeing


3 things you need to check : DRAIN MOTOR PUMP ,
LID SAFETY SWITCH & THE MAIN TIMER , hope it helps , AJ

Dec 27, 2009 | Washing Machines

2 Answers

Zanussi ZWC1300W Front Load w'Machine


is it spinning during spin cycle
your timer may have gone

Jan 18, 2009 | Zanussi ZWC1300W Front Load Washer

1 Answer

Zanussi washing machine wont spin


check the drain hole when you start the machine if the water is coming back out , if yes that means your dump valve is bad.

Apr 23, 2008 | Zanussi ZWF1430W Front Load Washer

Not finding what you are looking for?
Zanussi F1045W Front Load Washer Logo

Related Topics:

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1466 Answers

shaun taylor

Level 3 Expert

1525 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...