Mg3620-how to install ink cartridge - Office Equipment & Supplies

The Quick Start Guide shows how.

https://gdlp01.c-wss.com/gds/4/0300019334/03/MG3600_GS_U2a-1_V4.pdf

All the manuals are here
https://www.usa.canon.com/internet/portal/us/home/support/details/printers/inkjet-multifunction/mg-series-inkjet/pixma-mg3620/pixma-mg3620?tab=manuals

..

1. Unplug the power and the USB cables from the printer.
2. Open the cartridge door and hold down the power button.
3. Reconnect the power cables while still holding down the power button.
4. Close the cartridge door and release the power button. The ink cartridge is now reset.

Here is a link to a video that will walk you through the ink cartridge replacement process for your printer.


PIXMA MG3620 Installing the FINE Cartridges

Hi every one,
I understand that your HP Deskjet F4180, is printing slow with word or excel sheets.
I would recommend to take a look through this guide. slow printing
Hope to hear back from you, and have a great day!

"E5: The ink cartridge(s) is not installed. / The ink cartridge(s) cannot be recognized.

The ink cartridge may not be installed properly, or an unsupported ink cartridge may be installed.
Install a recommended ink cartridge.

Make sure to install both ink cartridges even when you set the machine to use only one ink cartridge in printing.
If one of the ink cartridges is missing, this error can occur."

The following text copied from HP website to tackle this problem. Follow the instructions below to install the print cartridges. NOTE: If you are installing ink cartridges in the unit for the first time, be sure to use only the print cartridges that came with the unit. The ink in these cartridges is specially formulated to mix with the ink in the print head assembly at first-time setup. Installing the print cartridges

1. Verify that the unit is on.
2. Open the ink cartridge door. Figure 1: Opening the ink cartridge door
3. Squeeze the gray tab below an ink cartridge slot to release the gray latch and then lift the latch. Figure 2: Lifting the latch 1 - Ink cartridge latch for the black ink cartridge 2 - Ink cartridge latches for the color ink cartridges NOTE: The ink cartridge areas are color-coded for easy reference. From left to right, the ink cartridges are black, yellow, light cyan, cyan, light magenta, and magenta.
4. Remove the new ink cartridge from its packaging.
5. Hold the ink cartridge by the handle and then slide the ink cartridge into the empty slot. NOTE: Make sure that the ink cartridge is inserted into the slot that has the same shaped icon and color as the ink cartridge. The copper-colored contacts should be facing the printer as the ink cartridge is inserted. Figure 3: Inserting an ink cartridge
6. Press down on the gray latch until it clicks into place. Figure 4: Closing the gray latch
7. Repeat steps 3 through 6 for each ink cartridge that needs to be replaced. NOTE: All six cartridges must be installed. The printer will not work if an ink cartridge is missing.
8. Close the ink cartridge door. Figure 5: Closing the ink cartridge door

Have a Good Day

To install your Brother machine#s ink cartridges, follow the steps
listed below:

1. Make sure that the Brother machine#s power is turned on.

2. Open the ink cartridge cover. This cover is located on right-hand
side of the Brother machine#s front panel.

3. Pull down the four lock release levers. There is one lock release
lever for each ink cartridge.

4. Take the ink cartridge out of its protective bag.

5. Carefully remove the yellow protective cap from the ink cartridge.

- DO NOT touch the side of the ink cartridge covered by the yellow
protective cap.

- Take care when removing this cover to prevent spilling ink and
staining your hands and clothing.

- If the cartridge cover comes off when you open the bag, the cartridge
will NOT be damaged.

6. Install each ink cartridge in the direction of the arrow on the
label.

- Please note that each color has its own specific position. These
positions are indicated by the colors of the four lock release levers.
Do not install an ink cartridge in the incorrect position, as this can
cause print quality problems.

7. Lift each lock release lever and push it until it clicks into the
closed position.

8. Close the ink cartridge cover.

- If the LCD shows #Install Black,# #Install Cyan,# #Install Magenta,#
or #Install Yellow# after you install the ink cartridges, please verify
that you have installed the cartridges correctly.

NOTE:

* DO NOT remove the ink cartridges from the Brother machine unless you intend to replace them. If you do, it may reduce the quantity of ink left in the cartridge, which may cause the Brother machine to miscalculate the amount of remaining ink.

* DO NOT shake the ink cartridges. If ink stains your skin or clothing, wash the affected area with soap or detergent immediately.

* DO NOT repeatedly insert and remove the ink cartridges. Doing so may cause ink to seep out of your cartridges.

* If you mix the colors by installing an ink cartridge in the wrong
position, clean the print head several times after correcting the
cartridge installation.

* Once you open an ink cartridge, install it in the Brother machine and use it up within six months of installation.

* Use unopened ink cartridges by the expiration date listed on the
cartridge package.

* DO NOT dismantle or tamper with the ink cartridge. Doing so can cause ink to leak out of the cartridge

E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
Are they Canon ink cartridges?
Remove the cartridges, make sure that the tape is removed , and re-install them. Make sure they are seated correctly.

For future reference , these are the error codes for your printer.
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Please remember to rate other users who assist you for free :)
How to install or remove ink cartridges To print normally, install or remove ink cartridges in an orderly procedure.
How to install ink cartridges
1. After confirming that the printer is powered on, open the front cover. The ink cartridge holder moves to the replacement position.
2. Take out an new cartridge from its casing and gently remove the orange protective tape in the direction of an arrow.


Caution: Do not attempt to reattach the protective tape once you have removed it. Do not touch the gold electrical contacts or the print head after removing the protective tape.


3. Insert the color cartridge into the right slot and then the black cartridge into the left slot.
Note: Push up on the nearest side of the cartridge until it clicks into place.


4. Confirm that the ink cartridges are installed properly.

(A) The ink cartridge is not installed properly.
(B) The ink cartridge is installed properly.

5. Close the front cover. Wait until the preparatory operation is complete; it takes about one to two minutes.
How to remove ink cartridges
1. After confirming that the printer is powered on, open the front cover. The ink cartridge holder moves to the replacement position.
2. Remove the ink cartridges.

Note: Handle the ink cartridges carefully to avoid staining clothes and surrounding work area.


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309