Question about Leica C-Lux 1 Digital Camera

1 Answer

Camera wont turn on - Leica C-Lux 1 Digital Camera

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 77 Answers

  1. Step one: Reset the camera
    1. If you have an optional memory card installed, remove it. (Although removing an optional memory card is not necessary for performing the reset, it eliminates the memory card as a possible cause of the problem.)
    2. Remove all power sources (batteries and AC power) from the camera for at least 5 seconds.
    3. Reinsert the batteries and close the Battery/Memory card door and/or reconnect the HP AC power adapter to the camera.
    4. After verifying that the camera works without an optional memory card, reinsert the card, if you have one.
    Try to turn the camera on. If it now works properly, the camera experienced a temporary electrical problem and should now work properly.
    • If the issue is resolved , you do not need to continue with the rest of the instructions in this document.
    • If the is not resolved , continue with the next step.
    Step two: Check for damage or corrosion on the batteries
    1. Open the Battery/Memory card door on the camera.
    2. Remove the batteries.
    3. If the batteries are damaged or show corrosion, replace the batteries.
    • If the issue is resolved , you do not need to continue with the rest of the instructions in this document.
    • If the is not resolved , continue with the next step.
    Step three: Recharge the batteries
    1. Recharge the batteries or replace the batteries if they are damaged or will not charge.
    2. Try turning the camera on after the batteries are fully charged or have been replaced.
    • If the issue is resolved , you do not need to continue with the rest of the instructions in this document.
    • If the is not resolved , continue with the next step.
    Step four: Ensure the batteries are installed correctly
    1. Re-insert the batteries correctly into the camera by referring to the image on the Battery/Memory card door for proper battery placement.
    2. Try turning the camera on.
    • If the issue is resolved , you do not need to continue with the rest of the instructions in this document.
    • If the is not resolved , continue with the next step.
    Step five: Turn on the camera without the memory card
    1. Open the Battery/Memory card door on the camera.
    2. Remove the batteries and optional memory card from the camera.
    3. Wait 15 seconds.
    4. Re-insert the batteries into the camera, but not the memory card.
    5. Try turning the camera on.
      • If the issue is resolved , format the memory card in the camera and then you do not need to continue with the rest of the instructions in this document.
      • If the is not resolved , continue with the next step.
      WARNING: Formatting the memory card in the camera will erase any images stored on the memory card. To avoid losing the images on the memory card, first save the images to a computer or another disk.
    Step six: Connect the camera to the optional AC power supply
    1. Connect the camera to the optional AC power supply. Ensure that the AC power supply is connected to a working power outlet.
    2. Try turning the camera on.
    • If the issue is resolved , you do not need to continue with the rest of the instructions in this document.
    • If the is not resolved , continue with the next step.
    Step seven: Service the camera If the camera still will not turn on, service the camera. Cause The following conditions can cause the camera to not turn on:
    • Improperly formatted memory card - memory cards should be formatted in the camera they are going to be used in
    • Corrupt images on the memory card
    • More than 300 pictures on a memory card
    • Damaged batteries
    • Dead batteries
    • Incorrectly installed batteries
    • Damaged camera


Posted on Jul 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My vivitar T028 camera wont turn on


i also have a Vivitar ViviCam t028 and i just changed the batteries and it wont turn on i was just about to empty the memory card but it wont turn on so i can't i don't know what's wrong with it.

Dec 25, 2012 | Vivitar ViviCam X327 Digital Camera

1 Answer

Camera wont turn on and lens wont go in


The camera has failed. Best thing to do is just replace it.

May 25, 2012 | Cameras

1 Answer

My camera wont turn on! I left it charging for a 2 whole days and nothing wont even connect to my hp. Wont even turn on when plugged in on the wall charger and the camera lense is always down wont come up...


Repair or sell as parts or repair or as is on a site such as Ebay.
When you cannot start the camera, then there is not much else to do.
It sounds as if there is something wrong in the circuits or the power end of the unit. In any case not good news.

Sep 01, 2009 | Samsung i85 Digital Camera

1 Answer

Wont turn on brand new batteries in


throw it away
as somone has droped the camera when it was turned on

Aug 03, 2009 | Kodak EasyShare C513 Digital Camera

1 Answer

Camera wont turn on


If you bought the camera in January, it's still under warranty for a year. When you get home call 1-800-OK-CANON to arrange warranty repair. They're usually very good about it, and will try to make things right.

May 29, 2009 | Canon PowerShot SD950 IS Digital Camera

1 Answer

Camera wont turn on


it looks like a sensor problem in your camera ............

have you tried using new batteries ........

Aug 24, 2008 | Pentax Optio E40 Digital Camera

1 Answer

Camera wont turn on&lens wont move


Folks,

Try to assist the machine mechanism. Turn the lenses (force is no necessary) when turning on or off. This should unlock the mechanism.
Good luck!

Aug 24, 2008 | Pentax Optio E40 Digital Camera

2 Answers

Polaroid A700 digital camera


my batteries are good but the camera just wont turn on at all

Jan 30, 2008 | Polaroid a300 Digital Camera

Not finding what you are looking for?
Leica C-Lux 1 Digital Camera Logo

300 people viewed this question

Ask a Question

Usually answered in minutes!

Top Leica Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Leica Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...