Question about Washing Machines

2 Answers

Zanussi ZWD14270W - Delay timer?

Dear Guru's!

Have just received deliver of our new washer/dryer. Being failry eco friendly, we were interested in the energy savings this model offered and the fact that we could delay start a program, very hady given the hours myself and my girlfriend both work. Unfortunately, there's nothing in the manual describing this feature and Zanussi say it doesn't have a delay start. It was purchased with Comet who advertise it as having this feature. Unsure now if we will return it as being sold incorrectly but I'm wondering if it is perhaps an un-documented feature? Comet are not the only on-line retailers advertising this model of washer/dryer having the delay start feature, so they're all wrong?

Look forwards to any assistance you may be able to offer.

Kind regards,

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer
Re: Zanussi ZWD14270W - Delay timer?

According to the Dixons website, the ZWD14270W (1400rpm) + ZWD16270W (1600rpm) do not come with a delay timer. However, the ZWD12270W (1200rpm) does.

Posted on Jun 15, 2008

Re: Zanussi ZWD14270W - Delay timer?

Ditto - it arrived this morning, also purchased from John Lewis over the cheaper Zanussi model specifically for the timer start feature. JL are going to check with Electrolux (Zanussi brand owners) and let me know...

Posted on Jan 15, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Can dial in programme but when start is pressed all leds and display go out and it bleeps once. Eng mode gives E41 as last error

E41 means door open or the machine is not able to lock the door
(door delay interlock does not close after 15 seconds).
Possible causes:
door open, door delay interlock, wiring, main PCB.


May 04, 2016 | Zanussi WJS1265W Front Load Washer/Dryer

1 Answer

How do i open my hoover eco technology door when it wont open and comes up with the code E15

That means a sevies tech has got to come out an unlock
it the main board is bad these front loaders
are bad about this they will lock up all your

Jun 13, 2014 | Zanussi ZWD1470W Front Load Washer / Dryer

1 Answer

Set timer

Good Afternoon Faye, this is Z! Thank you for your post!

I see you are interested in how to set timer and delay start on your Electrolux washer. However, may I please have the model number? The serial tag, which lists your model number, is typically located on the upper front, as you open the door. With this information I provide you the correct instructions on how to do so. Thank you!

Mar 28, 2014 | Electrolux EW1000i Front Load Washer

1 Answer

I have a whirlpool duet steam front loading washing machine model # WFW9600TA01. recently when my wife starts a load of laundry at night when she wakes up in the morning the washer is still turning at a...

I would assume the load in the washer is a small load and the washer has a difficult time adjusting the load to spin. I would push pause, wait for the system to unlock the washer. Check the load for how much water in the garments. If heavy, the unit has a unbalance issue, just try to continue the load. If the clothes are light than unload the washer into the dryer. Was the unit ran on delay? This may be a non issue if the unit ran on a delay and just never finished yet.
Give those a try and get back to me, I and interested in the status.

Aug 21, 2011 | Whirlpool Washing Machines

2 Answers

Machine won' spin

It sounds as though the main drum bearings have failed.
If you turn the drum by hand and it feels rough or you can feel it grating or rumbling, then the main bearings have gone.
Quite a major and expensive job to put right, you may find it more econonomical to purchase a new one.
Plz rate my comments.
thanks and a merry xmas.

Dec 21, 2008 | Zanussi ZWD1470W Front Load Washer / Dryer

2 Answers

Zanussi ZJD 125 on a timer switch

No prob, the washer never draws the full 3kw at any one time.
Plz rate this solution.

Dec 18, 2008 | Zanussi WJS1265W Front Load Washer/Dryer

1 Answer

Opening the door

Have you tried to disconnect it from power mains for a few minutes to see if that will reset the security timer?

Dec 05, 2007 | Zanussi WJS1265W Front Load Washer/Dryer

1 Answer

Zanussi WJS1265W

Problem 1,
You can remove the entire drawer to clean it out it might be blocked.
Problem 2
Once again this might be the mother board, we had the same problem, easily replaced by a qualified engineer, it now works fine.

Oct 29, 2007 | Zanussi WJS1265W Front Load Washer/Dryer

1 Answer

Zanussi WJD1257W Washer/Dryer

if computer is broken that is your timer dial not worth fixing sometimes as much as a new washer but it could be your interlock you can test this by closing door set machine to a programme hit the front of your washer to the right of the door as you look at it if not take lid of make sure power is off look down inside the front of your machine were your door seal is attached to the outer drum were u hit the washer on the inside will be your interlock switch replace that before paying out for a timer m8 more than likely that is the problem

Aug 13, 2007 | Zanussi WJD1257W Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

406 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides