Hi...getting "LOCAL IP ADDR INVALID" on one of my INTER-TEL PHONES....82622V2

This is not a 5330 question but a system question. This phones will work on more than 1 system. On a Mitel 5000 or Inter-tel 5000 system the feature code is press the digit 4 then dial the extension number. Hope this helps.

you can contact the mobile service provider....

If the printer is configured and has got a TCP/IP address, you can get the MAC mapping from any Windows PC in the same network like this:

Start -> Run Command -> enter "CMD" and press Enter -> type the command, PING ip.addr.of.printer (enter) and then ARP -a ip.addr.of.printer (enter).

If your network's IP addresses are centrally managed, ask your system administrator if it's possible to temporarily assign a fixed IP address for diagnostic purposes, then assign that address to the printer and do as described above.

free Airtel GPRS is working.
In NUTSHELL you had to do only 3 things

1. Enter your cel no. into USER NAME/NO. Field (If it is blank)
2. Change access point / APN to airtelfun.com or airtelmms.com
3. Configuring your application for following proxy setting…

- If u r using airtelfun.com
IP Addr : 100.1.200.99
Port no. 8080
- If u r using airtelmms.com
IP Addr : 100.1.201.172
Port No. 8799
That all about settings!

The Guide is here. You have to register for their site to get the instructions however.

Are you using speaker phone? Are you using the Hand Set?

If you are using the speaker phone, the first thing is to check the back end configuration of your IP phone system and Make sure that that Station has the Microphone Feature enabled. If it does, then the next step would be to configure a different phone with your same extension and ip. If that phone works fine, then it tells you that it is the microphone inside the original phone that is bad.

If it doesn't fix it, then the problem lies on some of the settings within your phone system.

Some other simply things to try if using the Handset, is 1) Replace the cord from the telephone base to the handset. 2) Grab a similar headset and hook it up to your phone. Test calling someone internally in the office, and out of the office.

That is not a function of the phone system. You need to call your telephone company and have them configure your lines to hunt

Possible loose connection in the telcom room or room jack. Try re-punching all the connections that relate to that phone and test again. No special cables needed for exec. phone, just a single pair as any other.

j

Line could be dead from local provider (Verizon,etc.).Could be a bad port on the phone system. Maybe a bad connection into phone system. What Intertel system do you have?

You definitely need to have a local phone installation company come in and help you with this. Axxess system setup and programming is extremely complicated for someone that has not worked with it and it requires specific software to make program changes. If you know the company that installed (or services) the system you should call them.