Question about Fujitsu ScanPartner fi-5120C Pass-Through Scanner
SOURCE: Code DS42019
Had the ds42019 error message on a Dell GX270 PC. The solution that worked for me was to install a USB 2.0 card and use the scanner on one of these ports. Apparently the PC has power problems and the USB 2.0 helped alleviate this.
Posted on Oct 13, 2008
SOURCE: How can I resolve this
Disconnect the printer or at least be sure it is turned off.
I'd do both and reinstall the CD software program that came with
the printer. When the software program asks you to connect the
printer to the USB port, do so and it should again work properly.
Hope this helps. Bud
Posted on Jan 27, 2009
Tips for a great answer:
Jul 29, 2013 | Scanners
a code reader
is just that it reads codes a scanner will read codes and will read readyness
status of monitors. A code reader just pulls codes. a scanner pulls codes, stores
freeze frame data and you can view live sensor data. the engine light may not
be on but there may still be a codes stored in the computer. the code reader
can still be used to check for codes that don't turn the light on. In a word it
is Same as scons and scones if you ask me
May 09, 2012 | Scanners
Dec 30, 2008 | Scanners
Oct 21, 2008 | HP Scanjet 4400c Flatbed Scanner
Jul 02, 2008 | Fujitsu fi-4120C Path-Through Scanner
Nov 20, 2007 | Acer ScanPrisa 640P Flatbed Scanner
801 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: