Question about Pioneer DV-310 DVD Player

1 Answer

Pioneer DV 310 K region free


Hi,

I'm looking for the unlock code to make my pioneer DV 310 K region free.

Thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

Step 1) Download the pioneer firmware here http://www.pioneerfaq.info/index.php?question=Firmwares

The site says the firmware only works on region 2 players. For this model it worked for my region 4 player in Australia

Step 2) Burn this file to a CD-ROM with name PIONEER as per these instructions - http://www.pioneerfaq.info/english/burn_guide.php

Step 3) Load the CD and your DVD player with ask you to flash the firmware. It says press play to start but instead HOLD DOWN ENTER during the entire process. DO NOT switch off your DVD during this time. When the tray opens take the CD ROM out but keep the DVD on. The flashing can take up two to three minutes. During this time HOLD DOWN ENTER ON THE REMOTE. The entire time!

Step 4) The DVD player will reboot. The tray should be empty. It will then load the tray back into the player. If the signal is disorted switch on and off.

Your done! Should work.

The most complex way of region freeing a DVD I have ever endured! :)

Posted on Jul 31, 2010

  • michaelvxd May 14, 2011

    Very Important !!
    To enable MultiRegion hold ENTER button on REMOTE for about 10 seconds, after upgrading Firmware and Rebooting. The player will turn-off. After you turn it on in will be Region-free :D

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My pioneer dvd player model dv-310 used to be able to play all region dvds. now it just plays all region dvds that have been played in it before, not new ones. how can i fix it?


We used a usb on the DVD and now we can't watch normal DVDs on it. We insert the DVD and the player just rejects it and opens the draw.

Feb 11, 2010 | Pioneer DV-310 DVD Player

1 Answer

A multi region DV-310 K stopped playing anything but region 2


Check your remote, try and see if you can find where you can default of restore first memory of your set. i think that will help........

Jan 29, 2010 | Pioneer DV-310 DVD Player

1 Answer

How do I unlock my Pioneer DV-310-s so it will accept all dvds, thanks.


Here is how to Make your Pioneer DV-310 regionfree.
Use this link and go there.
http://www.pioneerfaq.info/index.php?question=Firmwares
Search for file YJA8703A almost in the bottom under DV-310.
Download and burn on CD with nero,make sure the CD is being closed after burning.
The just mount the CD in your DVD player and press play.
#1. Press upgrade.
#2. Wait,don´t touch anything now.
#3. The tray will open after about 5-10 sec,take out CD.
#4. Player will uppgrade under about 1-2 minut,then the tray will close by it self,and the player says "CLEAR".
#5. And now here is the secret. When player says "CLEAR" ,push and HOLD the "enter button on THE PLAYER until it turns off(about 5 sec).
And there you go,standing infront of your brand new Multi regional Pioneer DV-310.

At least this worked great for me.
Good Luck!

/Jiinsen

Aug 08, 2009 | Pioneer DV-310 DVD Player

1 Answer

Pioneer dv300 dvd player - need region free unlock code


hi! try this one i hope it will work on your unit.
Remove any disc in the tray, Press the SETUP on the remote control. Move over
to GENERAL using the arrow keys; Select BASIC, Press DISPLAY - this will display
your region and firmware version. Press CONDITION/MEMORY (nothing is
displayed or changed on the screen). Press the REGION # required (i.e. 2 for
Region 2 etc). Press MENU to store.

Apr 24, 2009 | Pioneer DV-300-K Player

1 Answer

Unlock codes for Pioneer DVD player


Pioneer DV-667A

Converting the player to Multi-Region:

Requires the use of a Palm Pilot w/Palm OS 3.0 or later and the OmniRemote Pro from http://www.pacificneotek.com/
(Other PDAs using Palm OS and compatible with the OmniRemote Pro from http://www.pacificneotek.com/ can also be used).

1. Program the Palm Pilot/OmniRemote. For instructions on programming the Palm Pilot/OmniRemote click How to Program the Palm Pilot.
2. Power on the DVD player without any DVD in the tray.
3. Keep the programmed Palm Pilot close to the IR port of the DVD player.
4. Start the OmniRemote program.
5. Place OmniRemote in TV mode and tap the "0" button on the OmniRemote.
6. The DVD player will power off.
7. Power the DVD player on again. Check the Region-free status by playing a DVD.
****************************************************

Dec 13, 2007 | Televison & Video

Not finding what you are looking for?
Pioneer DV-310 DVD Player Logo

Related Topics:

2,010 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73635 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...