I tried to use the oven part of the glem gas, the igniter fires it up but it turns off as soon as I remove pushing the knob

This appears to be a solely Australian brand that we do not know on this North American website. This link may give you better results than me.

https://www.google.com/search?q=Glem+oven+ErrP+error

This is the maker. Phone their support

Glem Gas - Ovens, Microwave ovens, Hobs, Hoods

https://www.glemgas.com > ovr
Over fifty years of experience in the production of home appliances for cooking, years distinguished by a constant, uncompromising commitment to ideals.

are you turning it after it lights before releasing the knob
pushing it in starts the piezo spark but turning it lets in the gas

So when you are turning the oven on, It is the same process as your cooktop. you turn the knob to ignite( so its clicking) and once it catches fire you back off the knob to adjust your flame. the oven is the same. its just bthat all your igniters will want to light at the same time, but gas is only being fed to the location of whatever knob your turning. omnce oven is lit, turn back the knob to dedired temp setting. hope that amsers your question. good luck. Or, if no gas is getting to the location, make sure the valve for your gas is on.

Does your oven need an electric connection? Check if the plug is in the socket properly, if it is change the fuse and see if it works. If it does work check the. lead for a possible bad connection in the fusetop

First, Change your technician.
There is a part that senses the heat from the ignited gas, usually quite close to the flame on the oven burner where it first ignites. It is called a generator and it produces about 1/3 of a volt, that holds the gas valve open only while the flame is lit, as a safety device. Pressing the knob at the time of ignition bypasses this by holding the valve open, after releasing the knob then the system relies on the presence of an oven flame to hold the valve open. Check the generator at the point it enters the oven control valve, is it loose? Maybe it is faulty or the oven valve is faulty. Any real technician can identify the the problem easily.

Please give me details of Glem gas cooking range service centres in Kerala . My id [email protected]

Hi, just seen this, might be able to help if not sorted.

Do the burners ignite without using the ignition ie by match?

If not its probably the jets which are blocked.

If you need to know how to clear these let me know

Some of the models require you to push in the oven thermostat knob to set the pilot if it blows out. So try pushing in the knob and hold it while lighting the pilot. When the pilot lights continue to hold the knob in for about a minute. When you let go of the knob the pilot should stay lit. If it does not stay lit then try it one more time. If it continues to go out the thermocouple or aso might be bad and will need service.

I'll give this a go! With a cooker like this, you depress and then turn the control knob, press the ignition button and continue to depress the control knob for a few seconds. This is because a device called a thermocouple is heated by the flame and you have to continue to depress the control knob so that sufficient gas flows to heat up the thermocouple. If the thermocouple does not get hot or stay hot then the gas valve is automatically closed - stopping the gas. The thermocouple is a 'flame failure' safety device. If the gas gets cut off then the flame goes out and the thermocouple goes cold switching off the gas valve automatically. However, you are having to try and manually keep the gas going for a good five minutes. I would think that there is either a problem with the thermocouple or the gas control valve! Tony www.birminghamelectricsltd.com