Question about RTO Paslode 902000 IM250 Ii Cordless 16 Gauge 3/4 2 1/2 Inch Straight Finish Nailer

1 Answer

Pasload cordless finishing gun - still won't fire

I have dismantled, degreased, cleaned, dried and oiled my finishing gun. I removed and cleaned the spark plug cover, dried everything in sight. I added a couple of drops of oil (all products are Paslode ones). I put in a new gas cartridge. (Yes, I did check that the cover was fully down and gas was emitted on depressing the white nipple). I put in a freshly charged battery. I've done this twice and the b----- thing still won't fire.
Once I depressed the gas whilst fitted and heard a hiss of gas into the nailer. It fired just once. So, I assumed there was no blockage. But, to be sure, I blew air through the tube from the cartridge into the chamber on one of the cleanings. No barrier to gas transfer. I'm stuck and I'm half way through putting battens on my son's house before the renderer arrives. Help please!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 47 Answers

Barrel and fan cover 'o' rings may be leaking/ need replacing. item no 17 on the parts diagram.

Do you have a spark, you should just be able to hear the spark firing when the gun is applied to the work surface and the trigger pulled, it sounds like a click.if no spark heard it could be the switch on the fan head not working , a bad ignitor , or the spark is not sparking in the correct place, chaffed ignition wires.

is the gas you are using in date, there should be a date stamp on the gas bottle. if its out of date it can give problems.


Posted on Jul 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fire blade pasload pin gun doesn't punch the nail in


I'm assuming you've adjusted the depth gauge and this has had no affect? If so you need to do a full service before anything else. That's replacing both upper and lower o rings and give it a good clean. It sounds like your losing compression.

Aug 02, 2014 | RTO Paslode 902000 IM250 Ii Cordless 16...

1 Answer

I have a pasload im 250 ii straight finish nailer when I pull the trigger the motor runs with out the tip being pressed is this normal and when I press the tip and pull the trigger it does not fire


Yes, it is normal for the fan to run when the trigger is pulled. Does the fan start when you depress the nose?
If not, it most likely is a bent contact element, or a bad head switch.

Aug 19, 2013 | Omega Paslode 901000 Impulse Cordless...

1 Answer

Pasload greenlight on fan on gun cleaned wont fire


Does it flash when you pull the trigger? Does the fan start? What model? Is the gas in date? Is the inlet valve the correct way up?

Oct 06, 2012 | Tools & Hardware - Others

1 Answer

I have a duo fast SureShot 764 nail gun that won't depressurize after a shot is fired and the driver stays stuck out?


are you putting lubricating oil in the gun? it sounds like its very dry inside . but only a few drops in to the gun at a time, per manufactures recomendations, and only use the approved oil for that gun

Oct 06, 2012 | Tools & Hardware - Others

1 Answer

I have a new im65a pasloade nail gun that has only fired a couple of hundred nails and after standing for about 16 months the gun does not seem to be firing the fan comes on the green light flash the


your gas has expired , look at bottom of canister check the date. buy new gas also make sure cap on gas canister is down all the way till it snapps new gas doesnt come with cap down all the way

Apr 24, 2012 | Senco Air Tools & Compressors

1 Answer

The pin on my Dewalt dc616 cordless finish nail gun is ceasing up. How can i lubricate it? can i spray silicon into the nose of the gun?


Hello, W/D here.

The better way is to disconnect the air line from the gun, and place several drops of light oil in the gun while holding the trigger down. Oil daily. Then, re-connect the hose, and fire a few nails into scrap wood.
Another trick is to spray your nails with WD-40 before you load them into the gun.
Best regards, --W/D--

Feb 09, 2011 | Dewalt DC616 16g Cordless 18v Straight...

2 Answers

I have a paslode straight finish nailer, purchased in Australia around 2001. The problem is that the pin that drives the nail out of the gun does not retract back into the cylinder. I have it apart and the...


is the cylinder really dirty, if so it needs a thorough cleaning. your instruction mnual detailes how to do this. also look for a jammed nail in the nose area and possibly a bent driver.

Sep 15, 2010 | Omega Paslode 901000 Impulse Cordless...

8 Answers

Paslode nail gun will not fire. It makes all the noises that it normally make before firing a nail, but it doesn't do anything. I have hardly used this gun. The batteries are good and I have a new gas...


Make sure the spark plug ignites. Take tool apart as in cleaning. Hold micr switch near fan and watch as you pull trigger. you will see a spark. If not check the lead to igniter

Apr 13, 2009 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

I have paslode finishing nail gun , i cleaned it, not working now


The smoking is normal for a few times after cleaning ,but you might have put to much oil drops in chamber and piston chamber is getting a "vapor lock". Try recleaning with degreaser. Also have you forgotten to set the depth gauge at front of nose.

Please Rate jj505 Thanks

Mar 23, 2009 | RTO Paslode 902000 IM250 Ii Cordless 16...

Not finding what you are looking for?
RTO Paslode 902000 IM250 Ii Cordless 16 Gauge 3/4 2 1/2 Inch Straight Finish Nailer Logo

680 people viewed this question

Ask a Question

Usually answered in minutes!

Top RTO Tools & Hardware - Others Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Brad Brown

Level 3 Expert

15941 Answers

J.D. Browning
J.D. Browning

Level 3 Expert

2760 Answers

Are you a RTO Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...