Question about Belkin (F5D7050) 802.11a/g/b Wireless Adapter

1 Answer

Wireless connection between my hp pavilion a6119h pc and my hp officejet 5610

I have comcast cable as my internet provider and would like to have my printer wireless due to space what can you recomend....please tell me in words that a non computer person can understand thanks, ralph

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers
Re: wireless connection between my hp pavilion a6119h pc...

Best option is to buy a proprietary wireless print server device from your local PC world or similar electronics store. They are fairly easy to set up and usually come with full instructions. As long as its set up so your computer or network can see the device, you should have no problems printing from anywhere in the house then without having to run lots of wires.

Posted on Mar 28, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have comcast cable and internet but my cords wont reach to where my computer is, I also have a wireless linksys adater on my hard drive. Am I able to connect to my comcast modem with this?

That depends on what comcast modem you have. If it has an integrated router, yes. If it is just a modem not. Simply spoken, a modem just converts your computer's digital signal to whatever is on the other side, usually analog. It doesn't do what a router does - routing the signal.
Just reply to this post and let me know what model of modem you have and I can give you a definite answer.

Jan 07, 2013 | Linksys Wireless-G WMP54G 802.11g/b

1 Answer

I cannot connnect wirelessly with my linksys e1000 router and was told by their experts that my hp pavilion entertainment pc needed an update for the driver of my wireless adapter. I did go to hp website...

Check the following steps to connect wireless linksys router :

First, you have to connect the router to the ADSL or the cable modem.

Your system has to be set in such a way that it will get its TCP/IP network settings from the router via DHCP.

Second, you need to configure the router to use your Internet service.

Connect the antennas to the Linksys wireless router. Connect an Ethernet cable to the Internet port at the back of the Linksys router and it will establish a connection between your modem and router.

Connect another Ethernet cable between the computer and the router. Then connect the router to an electrical outlet.

Dec 04, 2010 | HP Network & Wireless Adapters

2 Answers

How do I hook up a Berklin wireless router to my comcast internet

Use an Ethernet cable to connect the port on the Comcast modem to the WAN port on the Berklin (Belkin????) router.
Use another Ethernet cable to connect one of the LAN ports on the router to the Ethernet port on your computer.
Start Internet Explorer on your computer.
Connect to the web-interface inside the router.
Run the "network setup wizard".
Run the "wireless setup wizard".

Nov 17, 2009 | D-Link 802.11g Wireless Router WBR-1310...

3 Answers

How do I hook d link up to my comcast router so that I can use it with my laptop?

Well, you are trying to connect a router to a router, that can be difficult. Is there anyway you can exchange the Dlink router for a Wireless Access Point (AP)? If you can, you just connect the AP to the 4-port network side of the comcast router, configure the wifi settings (security, etc), and you're good to go.
If you can't exchange it, then your best bet is to connect the 4-port (or internal) side of the dlink router to the 4-port side of the comcast router. Then the dlink will be seen by the comcast router as another internal connection, and you can set the wifi settings of the dlink at that point. If you connect the dlink to the comcast router via the External port on the dlink, then you are creating two separate IP subnets, a needless complex setup.

Nov 10, 2009 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

I have comcast cable net and D-link WBR 1310

Hi, forget about the USB connection since you wanted to use a router for your wireless connection. Contact Comcast asnd make sure they assist you in making your computer connect to the Internet using the ethernet connection because you are going to use the ethernet connection for the modem-router connection. Once your computer is online with the ethernet connection, you can connect your Dlink router to the modem and configure it for Internet connection. There will be more steps before you can use the wireless connection. Just make sure you can get online with ethernet connection first.

Jul 23, 2009 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Foce 2wire

Most device/routers/wireless devices that were specifically used by a different provider are not interchangeable unless this specific device can be given a firmware upgrade. If you were previous provider was Qwest, you probably had DSL service and now you have cable? Your best option is to purchase a new wireless device you can attach to your cable modem through Comcast. Good luck!

Apr 02, 2009 | 2wire (1000-100052-000) 802.11g/b Wireless...

1 Answer

Installing wireless adapter for xbox 360. Asks for wep code


You can see this link for the procedure--

Xbox Connection settings

Also see this link for details---

Xbox wireless

WEP code will be provided to you by your comcast. Check this link for wep key---

WEP Code

If you find this solution helpful then do rate this solution.


Feb 05, 2009 | 2wire (1000-000005-002) 802.11g/b Wireless...

1 Answer

Wireless Connection

It's possible that you are not yet connected to the wireless network that you have at home.
May I know the model no. of your wireless router from Linksys?
What is the operating system of your laptop?

You might also want to check if your computer is picking up the signal braodcasted by the linksys router.

May 19, 2008 | Linkskey Network & Wireless Adapters

1 Answer

Accessing the Internet

goto start
click run
type ncpa.cpl
click ok
network connections will come up
right click on wireless network conections
goto status and check whether sending and receiving packets are fine or not , it shud not be zero
goto support category on top of that window and check whether you are getting correct ip address or not
try to disable and enable the wireless network conections

Feb 18, 2008 | Network & Wireless Adapters

3 Answers

My network wireless adapter keeps dropping off

I would check with HP and see if they have a Vista driver for the wireless card. It sames to be the driver is in consistant.

Jan 03, 2008 | Network & Wireless Adapters

Not finding what you are looking for?
Belkin (F5D7050) 802.11a/g/b Wireless Adapter Logo

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Network & Wireless Adapters Experts


Level 3 Expert

18257 Answers

Martin Murray

Level 3 Expert

1614 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers

Are you a Belkin Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides