The bin arm on my Uline Model 402 ice maker broke off. I have a replacement bin arm. I took off the front plate of the ice maker unit, but am unable to thread the bin arm all the way through the bin arm opening. I can get it to the last 90 degree turn, but cannot go further because the bin arm which is already through the opening is blocked by the ice making tray. Is there a trick to threading the bin arm through? Do I have to take the assembly apart and separate it from the ice tray portion of the unit?
1st remove the icemaker from the unit. Then take the faceplate off.You might find that the support housing is fighting you.You should be able to move the arm into place as long as the icemaker is out.
I have a Maytag Plus. MZD2766GE. No ice but the water dispenser works fine. The freezer and food...
(More)
I have a Maytag Plus. MZD2766GE. No ice but the water dispenser works fine. The freezer and food cooler areas both are fine. No frozen line either. I have removed both solonoid valves and they seem to have continuity. Is the problem one of these valves. Thanks
Ice maker does not work properly on the following under countertop appliance:
Model#:...
(More)
Ice maker does not work properly on the following under countertop appliance:
Model#: ULN-C075FSS-00, Serial#: 013727-06-0082